Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Photoelectric proximity sensor detects objects up to 45 mm with NPN output and IP67 housing
The Sick VTF18-3E5912 is a cylindrical photoelectric proximity sensor with an NPN switching output. It detects objects using infrared LED light across a sensing range up to 45 mm, with a maximum range of 50 mm. The angled housing measures 60.6 mm and carries an IP67 enclosure rating for dust and water resistance. It suits automation tasks that need reliable short-range presence detection.
Verify that your control system provides a DC supply between 10 V and 30 V with ripple below ten percent. The sensor draws up to 30 mA and connects via a two-metre PVC cable with 0.14 mm² conductors and a 3.1 mm outer diameter. Ensure the NPN light-switching logic matches your input module and that the potentiometer adjustment is accessible in your mounting position.
This unit upgrades from sensors that lack IP67 sealing or that use a larger housing unsuited to tight spaces. The jump is worthwhile when you need the 45 mm sensing range combined with a 2 ms response time and an operating temperature span from –25 °C to +70 °C. It is not for applications requiring longer sensing distances or PNP output logic.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | SICK |
| Model name | SICK VTF18-3E5912 |
The sensor ships with a 2 m PVC cable permanently attached; you only need to provide a 10–30 V DC power supply and any mounting hardware such as brackets or M18 nuts.
Use the 45 mm value for reliable detection of standard targets; the 50 mm figure is the absolute maximum under ideal conditions.
The output can switch every 2 ms, so objects moving past the beam at up to several metres per second will still be detected reliably.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?