Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Photoelectric proximity sensor with background blanking, 0–45 mm range, NPN dark-switching output, 2 m cable, IP67 rated
The Sick VTF18-3N5612 is a cylindrical photoelectric proximity sensor with background blanking designed for industrial detection tasks. It operates on a 10 V DC to 30 V DC supply and provides an NPN dark-switching output rated at 100 mA maximum. The sensing range extends from 0 mm to 45 mm with a maximum of 50 mm, suited for short-range presence sensing in automation environments.
Focused optics produce a 3 mm light spot at 25 mm distance using an infrared LED source, which helps isolate small targets without background interference. The sensor has no adjustment mechanism, so the detection zone is fixed once mounted. A 2 m PVC cable with three 0.14 mm² conductors and a 3.1 mm outer diameter carries power and signal, simplifying wiring in confined spaces.
The plastic PBT/PC housing with PMMA optics meets IP67 enclosure rating, protecting against dust ingress and temporary immersion during wash-down cycles. Operating temperature spans –25 °C to +70 °C, covering cold storage and warm machine environments. Response time of 2 ms and 250 Hz switching frequency set the practical speed limit for high-cycle counting or positioning applications.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | SICK |
| Model name | SICK VTF18-3N5612 |
The sensor ships with a fixed 3‑wire PVC cable 2 m long and 3.1 mm in diameter; the cable is not detachable, so any damage means replacing the whole unit.
The 250 Hz switching frequency sets the maximum event rate; the 100 mA output current limit only caps the load each switching cycle can drive.
The housing is rated IP67 and specified for –25 °C to +70 °C ambient; no active cooling is required, but sustained operation at the top of that range will raise the housing temperature.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?