Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Miniature photoelectric retro-reflective sensor with PNP output, 10–30 V DC supply, IP67/IP66 rating, and 0.02–3.5 m sensing range
The SICK WL4-3F3130 is a compact retro-reflective photoelectric sensor with a PNP dark-switching output. It suits automation tasks that need a small rectangular housing and a visible red PinPoint LED beam. The unit operates on 10 V DC to 30 V DC and draws 20 mA. Its IP67 and IP66 ratings allow use in harsh industrial environments. Builders who need a teach-in adjustment or a longer sensing range than 4.5 m should look elsewhere.
The sensor ships with a 100 mm PVC cable terminated in an M8 3-pin connector for quick panel mounting. The 0.14 mm² conductors and 3.4 mm outer diameter fit tight cable routes. Wiring follows standard PNP polarity; incorrect supply polarity or a missing pull-down resistor on the load are the typical installation faults. The housing is ABS plastic with PMMA optics and weighs 30 g.
Under continuous operation the sensor maintains a switching frequency of 1,000 Hz with a response time below 0.5 ms. The output handles up to 100 mA and includes circuit protection A, C and D against short circuits and overloads. Operating temperature spans –40 °C to +60 °C without derating. The UL file NRKH E181493 confirms compliance for North American control panels.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | SICK |
| Model name | SICK WL4-3F3130 |
The PinPoint LED emits visible red light at 650 nm; a visible spot of Ø 75 mm at 1.5 m distance shows the beam is active and aligned.
The unit ships with a 100 mm PVC cable ending in an M8 3‑pin connector; a reflector and mounting bracket are not included and must be sourced separately.
The sensor covers 0.02 m to 3.5 m, so the standard 4.5 m maximum range model handles a 3 m application without needing a different variant.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?