Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A photoelectric proximity sensor with background suppression, PNP output, 10-30 V DC supply, 100 mm range, 1,000 Hz switching frequency and IP67 protection
The Sick WT150-P460 is a rectangular photoelectric proximity switch with background suppression. It operates on 10 V DC to 30 V DC and draws 20 mA. A visible red LED emits a 5° beam for precise detection. The PNP output supports light or dark switching selected via the L/D control cable.
The sensor detects objects from 2 mm up to 100 mm. A 5-turn potentiometer sets the exact switching point. Switching frequency reaches 1,000 Hz with a 0.5 ms response time. Output current is limited to 100 mA. Beyond 100 mm the sensor cannot reliably detect targets.
The ABS housing with PC optics meets IP67 for dust and water protection. Protection class II circuitry includes supply-voltage, short-circuit and reverse-polarity safeguards. Ambient temperature range spans –25 °C to +55 °C in operation and –40 °C to +75 °C in storage. Connection uses a 4-pin M8 male connector.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Sick |
| Model name | SICK WT150-P460 |
| Product type | Test Equipment |
| Color and finish | Red |
| In the box | |
| Number of items | 1 pack |
Yes, the supply voltage range is 10 V DC to 30 V DC, so a 30 V DC cabinet supply is within specification.
The sensor switches at up to 1,000 Hz with a 0.5 ms response time; use an oscilloscope or PLC input monitor to confirm clean transitions at the expected frequency.
The box includes a BEF-W150-A mounting bracket; the M8 4-pin mating cable is not supplied and must be purchased separately.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?