We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black low-profile CPU cooler with 60mm fan and copper heat pipes on aluminum fins

Silverstone

Silverstone SST-AR09-115XS 60mm 2 Ball CPU cooler

SKU CH-DB07-NJYM7 MPN SST-AR09-115XS

Compact 60mm dual ball-bearing PWM cooler with three 6mm copper heat-pipes and aluminium fins, fits Intel LGA 1150/1151/1155/1156 sockets in a 66mm height

  • Fan size60 mm
  • Supported CPU socketsIntel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA
  • Bearing design2 Ball
  • Rotational speed1200–5,000 RPM
  • Airflow rate6.7–27.9 CFM
  • Operating noise18.02–42.5 dBA

Model AR09-115XS

  • Low-profile 66 mm height fits compact Intel LGA 1150/1151/1155/1156 builds
  • 60 mm dual ball-bearing PWM fan spins 1200–5000 RPM for scalable airflow
  • Airflow range of 6.7–27.9 CFM matches cooling to load
  • Acoustic range of 18.02–42.5 dBA keeps noise proportional to speed
  • Copper heat pipes with aluminium fins transfer heat directly from the CPU

Compact Intel LGA Cooler

The Silverstone Argon SST-AR09-115XS is a low-profile air cooler built for Intel LGA 1150, 1151, 1155 and 1156 sockets. Three 6 mm copper heat-pipes make direct contact with the CPU lid, moving heat into a dense aluminium fin stack. A 60 mm dual ball-bearing PWM fan spins between 1200 and 5000 RPM to match thermal load.

Vertical 60 mm Fan Layout

The fan mounts vertically above the heatsink, drawing air down through the fins and exhausting it toward the motherboard. This orientation keeps the overall height at 66 mm, leaving clearance for slim cases or tight component spacing. Spring-screw brackets with a backplate secure the unit without needing access to the rear of the board.

Spring-Screw Mounting Kit

The bundled spring-screw bracket and backplane apply even pressure across the heat-pipes, improving contact consistency on the supported LGA 115x platforms. Dual ball bearings in the fan motor extend service life compared with sleeve alternatives. No additional brackets or adapters are included for other socket families.

How it compares

Measured against everything we stock in CPU Coolers & Heatsink Fans, at today’s prices. Recalculated every night.

Price $35.99
Pricier than about 83% of the 1,559 comparable items (median $19.99).
Fan size 60 mm
Lower than about 60% of the 812 comparable items (median 80 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSILVERSTONE
Product lineArgon Series
Model nameSST-AR09-115XS
Product colorBlack
Product typeFan & Heatsinks
Performance
Rotational speed1200–5,000 RPM
Airflow rate6.7–27.9 CFM
Size & build
Fan size60 mm
Bearing design2 Ball
Cooler materialCopper heat pipes with aluminum fins
Fan mountingVertical
Heatsink dimensions88m × 66 mm × 88 mm (w/ Fan)
Product weight0.65 lb w/o fan
Shipping weight0.42 kg
Package size119 × 109 × 107 mm
Compatibility
Supported CPU socketsIntel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156
CPU cooler height limit66 mm
Environment & compliance
Operating noise18.02–42.5 dBA

Other versions of this model

1 more in the same range

Questions about this item

How much clearance above the motherboard does the 66 mm cooler height leave for RAM or VRM heatsinks?

The cooler stands 66 mm tall, so any component taller than that will interfere; measure your tallest module before installing.

What noise level should I expect from the 60 mm dual ball bearing PWM fan when it runs at 5000 RPM under sustained load?

At maximum speed the fan reaches 42.5 dBA, which is audible in a quiet room but typical for a compact 60 mm cooler.

Which Intel sockets does the included spring-screw bracket with backplane support out of the box?

The mounting kit covers LGA 1150, 1151, 1155 and 1156; no additional hardware is needed for those platforms.

More in CPU Coolers & Heatsink Fans

Similar items