Simmtec, Inc 8GB (2x4GB) DDR2-667 FBDIMM server RAM
Eight-gigabyte dual-channel DDR2-667 kit with two 240-pin fully-buffered DIMMs, CL5 latency, ECC registered, 1.8 V operation
- Total capacity8 GB (2 × 4 GB)
- 8GB dual-rank capacity for dense server workloads
- 667 MHz DDR2 speed rated at PC2-5300
- Fully buffered ECC registered for data integrity
- 240-pin DIMM form factor fits compatible server boards
Server Memory Kit
This Simmtec 8GB kit contains two 4GB fully buffered DIMMs built for DDR2 server platforms. The modules run at 667 MHz with CL5 latency and operate at 1.8 volts. They are registered ECC memory intended for multi-socket systems that require error correction and signal buffering. This kit will not work in desktop or laptop computers.
240-pin FBDIMM Build
Each stick uses a 240-pin connector and a normal-height profile with 36 chips in a 2Rx4 dual-rank layout. The fully buffered design moves the memory controller onto the module itself, reducing electrical load on the motherboard. Installation requires a server board with DDR2 FBDIMM slots; standard DDR2 desktop slots are physically and electrically incompatible.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 94% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB (2 × 4 GB)
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $2.62 per GB
- Cheaper than about 91% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Total capacity | 8 GB (2 × 4 GB) |
Questions about this item
What speed does the DDR2-667 FBDIMM interface actually run at in a server?
The modules operate at 667 MHz, which corresponds to the PC2-5300 data rate for fully buffered DIMM slots.
What physical space and slot type are required to install these 240-pin FBDIMMs?
Each stick uses a standard 240-pin DIMM form factor with normal height, so it fits any server board that accepts DDR2 fully buffered DIMMs.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR16LE11S8/4KF 4GB DDR3 1600 ECC CL11 1.35V server RAM
- 4 GB
- DDR3 1600
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KCP432SS88 server RAM DDR4 3200 MHz CL22 1.20 V 260-pin 8 GB
- CL1.5
- Standard Edition
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
RIMLANCE RRD17000S8C4 4GB DDR4 2133 ECC Registered RDIMM
- 4 GB
- DDR4 2133





