SKF 99353 Wear Sleeve 89.92-90.07mm Shaft Range
Stainless-steel wear sleeve fits 89.92–90.07 mm shafts with 101.6 mm flange and 16.94 mm overall width
- Product colorTransparent
- Restores shaft sealing surface without machining
- Fits shafts from 89.92 to 90.07 mm diameter
- Stainless steel with chromium plating resists corrosion
- Withstands operating temperatures up to 225 °F
- Thin 0.28 mm wall minimises assembly space
Wear Sleeve for 89.92–90.07 mm Shafts
The SKF 99353 wear sleeve fits shafts between 89.92 mm and 90.07 mm. It is made from chromium-plated stainless steel for heavy industrial applications. The sleeve provides a hardened running surface for rotary shaft seals. It operates at temperatures up to 225 Degrees F.
Capacity and Headroom
The sleeve adds 0.28 mm wall thickness to the shaft with an overall width of 16.94 mm and a 13.36 mm width on the shaft. The flange diameter is 101.6 mm with an outside diameter tolerance of +/- 1.6 mm. Width tolerance is +/- 0.8 mm. It cannot compensate for shaft damage exceeding the wall thickness or diameters outside the stated range.
Replaces Worn Seal Surfaces
This sleeve upgrades a grooved or corroded shaft without re-machining or replacement. The jump is worth it when the original surface finish is too poor for a new seal to function. It is not for shafts smaller than 89.92 mm or larger than 90.07 mm, nor for non-industrial light-duty uses.
How it compares
Measured against everything we stock in Engine Service & Diagnostic Tools, at today’s prices. Recalculated every night.
- Price $55.99
- Pricier than about 82% of the 1,113 comparable items (median $19.99).
Specifications
| Product | |
|---|---|
| Brand name | SKF |
| Product color | Transparent |
Questions about this item
Will the SKF 99353 wear sleeve fit a shaft that measures 89.92 mm?
Yes, the sleeve covers a shaft range of 89.92 to 90.07 mm, so a shaft at the minimum diameter is within specification.
How can I confirm the sleeve is seated correctly after installation?
Measure the installed width on the shaft; it should be 13.36 mm, and the flange diameter should read 101.6 mm within the ±1.6 mm tolerance.
Does the box include installation tools or adhesive, or must I source them separately?
The package contains only the chromium-plated stainless-steel sleeve (overall width 16.94 mm, wall thickness 0.28 mm); tools and adhesive are not included.
More in Engine Service & Diagnostic Tools
