TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Controls two computers across three monitors with 8K at 60 Hz or 4K at 144 Hz, plus four USB 3.0 ports and a wired remote
This KVM switch lets one keyboard, mouse and four USB 3.0 peripherals control two computers across three displays. It is built for users who need simultaneous access to multiple systems without swapping cables. The package includes all required video and USB cables plus a wired remote for desk-side switching.
Each DisplayPort 1.4 and HDMI 2.1 output supports up to 7680×4320 at 60 Hz and 3840×2160 at 144 Hz. The switch passes these signals without compression when the host GPU and monitor both support the mode. Bandwidth runs out above 8K 60 Hz, so higher refresh rates at that resolution are not possible.
The unit draws power from the included 12 V adapter and adds no software layer, so it works with Windows, macOS and Linux alike. Each computer must provide two DisplayPort 1.4 and one HDMI 2.1 output to fill the three monitor ports. Four USB 3.0 ports free up the host ports for other devices.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | HDMI + 2 Displayport |
| Display | |
| Supported video resolution | 7680 × 4320 |
| Graphics | |
| Monitor support | Triple Monitor ( 2 Displayport + HDMI ) |
| Ports & slots | |
| Computer ports | 2 Ports |
| Monitor ports | 3 Ports |
| USB support | With USB support |
| Power | |
| Power requirements | Requires no additional power supply |
| In the box | |
| In the box | 1*Triple Monitor USB3.0 KVM Switch 2*DP1.4 Cables(1.5m/4.9 ft) 1*HDMI2.1 Cable(1.5m/4.9 ft) *USB3.0 Cables(1.5m/4.9 ft) 1*Wired remote controller(1.52m/5 ft) 1*User manual 1 × 12 V Power Adapter(1.52m/5 ft). |
| More details | |
| Switching method | Push Buttons |
| Status lights | Yes |
Yes, the switch supports up to 8K 60 Hz and 4K 144 Hz, so any monitor at 4K 60 Hz or lower will work within its bandwidth.
Check each monitor’s on-screen information menu — it should report 7680×4320 at 60 Hz — and confirm the KVM’s LED for the active computer is lit.
The box contains two 1.5 m DP 1.4 cables, one 1.5 m HDMI 2.1 cable, four 1.5 m USB 3.0 cables, a 1.52 m wired remote, a 12 V power adapter and the manual; no extra cables are required.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?