SMUGDESK 0.5M Mini SAS SFF8087 to 4×90° Angled SATA Breakout Cable
Converts one Mini SAS SFF8087 port into four 90° angled SATA connectors with 30AWG low-loss wire for 12Gbps internal server storage links
- Splits one SFF8087 port into four SATA drives
- 12Gbps bandwidth handles HDD, SSD and RAID arrays
- 30AWG lowloss wire keeps signals stable over time
- 90° angled plugs save chassis space and ease routing
- .5M length fits tight server, NAS and PC cases
Breakout cable for multidrive servers
This internal breakout cable splits a single Mini SAS SFF8087 port into four 90° angled SATA connectors, enabling compact multidrive connections inside servers, NAS units and workstations. It is built for administrators who need dense, reliable storage wiring without excess cable bulk.
Practical limits of the SAS interface
The cable supports 12Gbps bandwidth across each lane, matching the throughput ceiling of the SAS 3.0 electrical specification used by modern backplanes. Performance will scale down to the speed of the slowest attached drive or controller, so 6Gbps SATA devices will operate at their native rate rather than the cable maximum.
Critical spec: 30AWG lowloss wire
Premium 30AWG conductors reduce signal attenuation over the .5M run, preserving eye-diagram integrity at 12Gbps where thinner or longer cables would introduce errors. If the chassis demands a longer reach or a different exit angle, this specific wire gauge and fixed length will not suit the build.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 87% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Is the 0.5M length right for my server chassis?
The 0.5M length suits short internal runs in compact servers, NAS units and PC cases where drives sit close to the controller.
Will the 12Gbps rating give me full SSD speed?
The cable supports 12Gbps bandwidth so each SATA drive can run at its native 6Gbps limit without the cable becoming a bottleneck.
Does the SFF8087 end work with standard SAS backplanes?
Yes, the Mini SAS SFF8087 connector mates with standard SAS controller ports and backplanes that use the same interface.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
EN-Labs SFF-8643 to 4×SFF-8482 SAS cable with SATA 15-pin power 1.64ft
- Others
- Black & Blue
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
10Gtek Mini SAS SFF-8087 cable, 1.64 ft, 2 pack
- Cable Connectors
- Black





