We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal Mini SAS SFF-8087 to four SATA 7Pin cable, 1.0 meter, shielded

SMUGDESK

SMUGDESK 1.0M Mini SAS SFF-8087 to 4 SATA 7Pin Cable

SKU CH-1JTM-5H5D3

One-metre shielded cable links an SFF-8087 host to four SATA drives at 6Gbps for RAID arrays

  • Mini SAS SFF-8087 host splits to four SATA 7Pin drives for multi-channel storage expansion
  • SATA III 6Gbps bandwidth supports stable high-speed SSD and HDD data access in RAID arrays
  • 0 metre length allows flexible internal routing inside server chassis and storage cabinets
  • Shielded wire construction suppresses electromagnetic interference for reliable long-duration operation
  • Data-only cable design requires separate power connections for each attached hard drive

Internal SAS to SATA cable

This 1.0 metre cable connects a single Mini SAS SFF-8087 host port to four SATA 7Pin target drives, providing a one-to-four multi-channel link for server RAID arrays and industrial storage systems. It is designed for administrators building high-density storage enclosures who need to break out a SAS backplane connection to individual SATA hard disks or SSDs. The cable handles data only and does not supply power to the attached drives.

Thermals and signal integrity

Shielded conductors suppress electromagnetic interference so that sustained SATA III 6Gbps bandwidth remains stable during long-duration RAID operation inside server chassis and storage cabinets. The 1.0 metre length allows neat routing without excess slack that could obstruct airflow around drive bays. Because the assembly carries no power lines, it adds no thermal load to the enclosure and requires no additional cooling consideration.

Wiring and installation notes

The package supplies the data cable alone; no drive power splitters, mounting brackets or management software are included. Installers must verify the SFF-8087 pin definition against their controller before connection and avoid sharp bends or excessive pulling that could damage internal conductors. Separate SATA power cables from the system power supply are required for each target drive.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 83% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the SFF-8087 end to my RAID controller and avoid the common pin-alignment mistake?

Insert the Mini SAS SFF-8087 plug straight into the controller port until the latch clicks; do not force it at an angle or the 36-pin interface can bend.

What upkeep does the shielded 1.0M cable need during long-term RAID use?

Inspect the shielding jacket periodically for cuts or kinks; replace the cable if the braid is exposed or connectors feel loose.

What throughput ceiling appears first when four drives run sustained transfers?

The SATA III 6Gbps link per drive is the first limit; the shared Mini SAS host lane cannot exceed that per-channel rate.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items