SMUGDESK 1.2M 90° USB 3.0 Type-A to Micro-B Cable with Panel Mount Screws
A 1.2 m USB 3.0 cable with 90° right-angled connectors and panel-mount screws for secure fixed installations
- 90° right-angled connector fits tight industrial spaces
- USB 3.0 delivers up to 5Gbps data transfer speed
- Panel mount screws secure cable to equipment panels
- 2m length suits fixed wiring in embedded systems
- Reinforced connectors resist vibration for continuous operation
Industrial USB 3.0 Cable
This 1.2 metre USB 3.0 cable links Type-A and Micro-B ports in fixed industrial and embedded installations. The 90 degree right-angled connectors suit tight-space equipment panels, cameras and external drives where straight plugs cannot fit. It is built for continuous use in vibration-prone environments. Buyers needing longer reach or a different connector orientation should look elsewhere.
Thermals Noise Power
Passive copper conductors carry data and power without active cooling, so the cable adds no fan noise or heat to the system. Power draw follows the USB 3.0 specification for the connected device, with no extra overhead from the cable itself. The reinforced shell resists temperature cycling in industrial cabinets.
Panel Mount Screws
Supplied panel-mount screws lock each connector to the equipment chassis, preventing accidental disconnection from vibration or cable tug. This fixed mounting keeps the 90 degree plugs aligned in tight bays, reducing strain on the port and extending service life. No driver or software installation is required for operation.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 70% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the panel-mount screws on the 90° Micro-B connector?
Align the screw holes on the connector flange with the panel cut-out, insert the supplied screws, and tighten them evenly so the right-angled plug sits flush without stressing the cable.
Will the screw threads or connector housing need replacement after long-term vibration?
The reinforced connectors and anti-loosening screws are built for continuous vibration-resistant use; no periodic replacement is expected under normal fixed-mount conditions.
At what point does the 1.2 m length limit signal quality at 5 Gbps?
The 1.2 m length is within the USB 3.0 specification for 5 Gbps operation, so sustained transfers stay at full speed without an active repeater.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 cable 3.3ft 40Gbps 240W Copper
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 1.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek 240W USB4 cable 1.6Ft 40Gbps 8K@60Hz
- USB C to USB C
- USB4





