We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten Molex-to-SATA power adapter cables, black connectors, coiled together

SMUGDESK

SMUGDESK 10-piece 4-pin Molex to 15-pin SATA power adapter cord

SKU CH-YV6Q-2PPXY

Ten adapters convert Molex outputs to SATA power for drives and optical units

  • Powers 10 drives from legacy Molex connectors
  • Converts 4-pin Molex to 15-pin SATA power
  • Thick copper core delivers stable current to drives
  • Moulded strain-relief connectors resist bending inside chassis
  • Plug-and-play hardware connection needs no software setup

Bulk 10-Pack Molex-to-SATA Power Adapters

This lot contains ten 4-pin Molex male to 15-pin SATA power adapter cables for desktop internal power conversion. Each cable converts a legacy Molex output from the power supply into a standard SATA power port for hard drives, solid-state drives or optical drives. The bulk quantity suits system integrators, repair shops and enthusiasts handling multiple upgrades or chassis builds. No drivers or software are required for operation.

Copper Cores and Moulded Strain Relief

Thickened copper wire cores provide stable current output to prevent insufficient power issues such as drives not being detected or failing to spin up. Moulded reinforced connectors resist pulling and bending damage during installation and long-term operation inside the chassis. The purely passive hardware connection adds no active components that could generate extra heat or noise. Power draw depends entirely on the attached storage devices.

Plug-and-Play Hardware Conversion

The adapters deliver a direct Molex-to-SATA power conversion without any bundled software, drivers or configuration utilities. Each cable simply plugs into a spare 4-pin Molex port on the power supply and connects to the 15-pin SATA power input on the target drive. This simplicity accelerates mass assembly, hardware modification and older system renovation projects. Buyers must confirm their power supply has enough free Molex ports before use.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $13.99
Typical for this category: the median of 402 items is $13.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 4-pin Molex to 15-pin SATA adapter cables inside my PC?

Plug each Molex end into a spare PSU Molex port, then attach the 15-pin SATA connector to the drive; no drivers or software are required.

What maintenance or replacement will these adapter cables need over time?

The molded strain-relief connectors resist pulling and bending, so no routine maintenance is expected under normal chassis conditions.

What limit appears first when these adapters run under sustained load?

The thickened copper wire core is designed to deliver steady current and avoid insufficient power to the connected storage devices.

More in Jumper & Adapter Power Cords

Similar items