SMUGDESK 2 Pack 1m Mini SAS SFF-8087 to 4 SFF-8482 SAS Cable

Two-Cable Server Breakout Kit

This pack supplies two identical one-meter breakout cables built for enterprise servers, RAID arrays and NAS enclosures. Each cable splits a single SFF-8087 Mini SAS port into four independent SFF-8482 connectors so you can attach up to four SAS or SATA drives per cable. The design targets administrators who need dense, tidy internal wiring for multi-disk deployments.

Sustained Operation With Auxiliary Power

Gold-plated contacts resist oxidation during continuous 24/7 duty cycles and keep signal loss low across the full length. Every drive branch includes a SATA power tap that draws from the PSU when the backplane cannot supply enough current on its own. This extra feed prevents spin-up failures, drive drop-outs and array degradation during prolonged heavy read-write workloads.

One-Metre Length For Standard Rack Depth

The 3.3-foot cable is sized for typical 2U and 4U chassis, letting you route along existing cable ties without slack that blocks airflow. It supports both 3.5-inch and 2.5-inch enterprise drives, but the fixed length may not reach distant drive bays in full-depth cabinets or custom enclosures. Buyers who need longer runs or right-angle connectors will need a different cable.