We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two XT60 female to DC 5.5mm×2.5mm female adapter cables

SMUGDESK

SMUGDESK 2 Pack XT60 Female to DC 5.5mm×2.5mm Female Power Adapter Cable

SKU CH-R59K-WHPCZ

Two cables convert XT60 battery connectors to DC 5.5mm×2.5mm barrel jacks for powering TS100 soldering irons, FPV monitors and portable equipment

  • Convenient dual pack provides spare XT60 to DC barrel jack cables
  • Converts XT60 battery output to standard 5.5mm×2.5mm DC power interface
  • Powers TS100 soldering iron and FPV monitors from lithium battery packs
  • Durable wire construction ensures stable current delivery with reduced voltage loss
  • Lightweight portable design suits outdoor DIY, RC projects and field work

Product Purpose

This two-piece adapter set converts XT60 female connectors to DC 5.5mm × 2.5mm barrel jacks. It lets makers and field technicians power DC-input gear from XT60 lithium battery packs. Typical uses include the TS100 soldering iron, FPV monitors and other portable equipment. The cables carry power only and do not transmit data.

Compatibility Check

Verify that your device accepts a 5.5mm outer diameter and 2.5mm inner diameter barrel plug before ordering. Confirm the power source provides an XT60 female outlet and that its voltage matches the equipment requirement. The adapter has no built-in regulation, so the battery voltage passes straight through to the load. Ensure polarity alignment between the XT60 pack and the DC socket on your device.

Sustained-Load Behaviour

Conductive wires and firm terminals minimise voltage drop during continuous operation. Flexible insulation resists fatigue from repeated bending in mobile setups. Current capacity is limited by the XT60 interface and the 5.5 × 2.5 mm barrel specification, so monitor connector temperature on high-draw loads. The lightweight cables add minimal bulk to field kits while maintaining stable delivery.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $13.99
Typical for this category: the median of 402 items is $13.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the pack and what else do I need to use it?

The pack contains two XT60 female to DC 5.5mm×2.5mm female adapter cables. You will need an XT60 lithium battery pack and a device with a DC 5.5mm×2.5mm power port.

Which version should I choose for a TS100 soldering iron?

This cable is optimised for the TS100 soldering iron and other devices that use a DC 5.5mm×2.5mm barrel jack. Confirm your device matches that interface before buying.

What does the 5.5mm×2.5mm figure mean when I plug it into my gear?

It identifies the inner and outer diameter of the barrel jack, ensuring a secure fit on equipment that requires that exact DC power connector size.

More in Jumper & Adapter Power Cords

Similar items