SMUGDESK 20+4Pin LCD Power Supply Tester SATA
Tests ATX, ITX and BTX power supplies via 20+4pin, PCIe and SATA connectors with real-time LCD voltage readout
- Tests 20+4pin ATX, ITX, BTX PSUs
- LCD shows realtime voltage for quick health check
- Checks PCIE, SATA, HDD power rails
- Plugandplay, no software or drivers needed
- Compact build for PC building and repair
Portable PSU Diagnostic Tool
This compact LCD tester connects directly to 20pin and 24pin motherboard power connectors on ATX, ITX and BTX power supplies. It also accepts PCIE, SATA and HDD power plugs so technicians can verify multiple rails with one handheld device. No software or drivers are required, making it ready for immediate use on the bench or at a customer site.
Single-Rail Readout Limitation
The built-in LCD displays realtime voltage values for each connected connector, yet it cannot apply a load or measure ripple, noise or transient response. Intermittent faults that appear only under load may therefore go undetected. Users who need full stress validation will require a separate load tester or oscilloscope.
Basic Voltage Verification Coverage
The unit comfortably handles quick go/no-go checks on mainboard, graphics, SATA and HDD power outputs before a PSU is installed in a chassis. It runs out when deeper analysis such as efficiency curves, cross-load regulation or hold-up time is needed, as those measurements fall outside its passive monitoring design.
How it compares
Measured against everything we stock in Multimeters & Electrical Testers, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 94% of the 971 comparable items (median $30.99).
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 20pin or 24pin connector for my motherboard?
The tester includes a combined 20+4pin plug that fits both legacy 20pin and modern 24pin motherboard sockets.
What does the LCD voltage reading tell me about my power supply?
The screen shows realtime voltage on each rail so you can spot overvoltage, undervoltage or unstable output before it damages components.
Does the SATA connector test the same rails as the main 24pin?
The SATA and PCIE connectors let you check the peripheral power rails separately from the motherboard main power rails.
More in Multimeters & Electrical Testers
Similar items
aFe Power WG-026 10-piece 5-color test lead set 20.5 in 22 AWG electrical system tool
- Corded Electric, fa…
- 20.5 L x0.5 W x0.5…
ZUFECY BT-168 battery tester for AAA AA C D 9V 1.5V button cell
- No, Battery Powered…
- 4 L x1 W x1 H inches
Power Circuit Probe Tester 9V-30V 0.3V-70V 10 functions
- 1 Piece
- Automotive Circuit…
aFe Power 40508 Digital Multimeter Electrical System Tool
- 1 Piece
- Includes large, eas…





