SMUGDESK DisplayPort cable 10FT 8K 60Hz 4K 144Hz
Connects a PC or laptop to a monitor at 8K 60 Hz or 4K 144 Hz over a 10 ft male-to-male link
Cable Length 10 Feet
- 3.3 Feet$10.99
- 6.6 Feet$11.99
- 10 Feet$18.99
- 16.4 Feet$15.99
- 8K at 60 Hz with 7680x4320 resolution
- 4K gaming at 144 Hz for smooth motion
- 4 Gbps bandwidth handles HDR and 10-bit colour
- 50 percent more bandwidth than DisplayPort 1.2
- 10 foot length suits desk or living-room setups
10 ft DisplayPort 1.4 cable
This 10 ft DisplayPort 1.4 male-to-male cable carries up to 32.4 Gbps. It supports 8K at 60 Hz with 10-bit colour, RGB 4:4:4, HDR and DSC. It also handles 4K at 144 Hz and lower resolutions at up to 165 Hz. The nylon-braided jacket protects the conductors during routing.
Gamers and creators needing long reach
The 10 ft length suits setups where the PC sits far from the monitor or TV. Builders who need a shorter run should choose a different length. Users whose displays only accept HDMI or USB-C video input cannot use this cable. It also does not carry Ethernet or USB data alongside video.
Sustained 32.4 Gbps over full length
The cable maintains the full 32.4 Gbps link rate across the entire 10 ft span without dropping to a lower speed tier. Signal integrity holds at 8K 60 Hz and 4K 144 Hz during extended sessions. HDCP 2.2 handshake remains stable for protected content playback. Multi-stream transport continues to function for daisy-chained displays.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 1.4 Cable 10ft 8K@60Hz 4K@144Hz HBR3 32.4Gbps Braided
SMUGDESK DisplayPort 1.4 cable 16.4ft Grey 8K@60Hz 4K@144Hz HBR3 32.4Gbps
- Grey
Questions about this item
Do I need a graphics card with a DisplayPort 1.4 output to get 8K at 60 Hz from this cable?
Yes. The cable is built to the DisplayPort 1.4 specification and carries 32.4 Gbps, so the source must provide a DP 1.4 port to reach 7680x4320 at 60 Hz.
Will this cable work with my older monitor that only has a DisplayPort 1.2 input?
It will. DisplayPort 1.4 is backward compatible with 1.2, so the link will negotiate at 1.2 speeds and deliver up to 4K at 60 Hz on that display.
How can I confirm the cable is running at 8K 60 Hz after I plug it in?
Open your GPU control panel or Windows display settings and verify the active resolution reads 7680x4320 with a 60 Hz refresh rate and 10-bit colour selected.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A033 DisplayPort 1.4 cable 16.4 ft 8K 60Hz 4K 144Hz 32.4 Gbps black
- 16.4 ft (5 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
LUOM BK-CD2 USB-C to DisplayPort 1.4 cable 10 ft 32.4 Gbps 8K 60 Hz 4K 144 Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Jansicotek BK-CD2 USB-C to DisplayPort 1.4 cable 10 ft 8K@60Hz 4K@144Hz
- 10 ft (3.05 m)
- DisplayPort Cable










