SMUGDESK IEC320 C14 to C7 Power Adapter

IEC C14 to C7 adapter for rack-to-device power

This IEC320 C14 to C7 adapter connects standard rackmount outlets to equipment that uses a two‑pin C7 socket. It suits server rooms, offices and home setups where a PDU, UPS or cabinet strip supplies C14 power but the device only accepts a C7 plug. The compact converter removes the need for a separate wall power supply.

10 A 250 V AC rating defines the safe operating

The adapter is rated for a maximum of 10 A at 250 V AC, so it must not be used on circuits that exceed those limits. Oxygen‑free copper conductors keep voltage drop and heat low during continuous operation, but the 10 A ceiling remains the hard boundary for any connected load.

Plug‑and‑play install with strain‑relief protection

Simply insert the C14 male end into the rack outlet and plug the C7 device into the female socket; no drivers or tools are required. The reinforced PVC shell and built‑in strain relief guard against cable fatigue from repeated mating cycles. Loose contact is the typical failure mode if the connector is not fully seated.