SMUGDESK Mini SAS HD SFF8643 to SFF8088 Conversion Cable 1m
Converts internal Mini SAS HD SFF8643 ports to external SFF8088 with integrated PCBA for stable 6Gbps server storage expansion, 1m length
- PCBA-built female connector ensures stable SFF8643 to SFF8088 conversion
- 6Gbps data rate supports enterprise server storage performance
- Bridges internal Mini SAS HD ports to external JBOD enclosures
- 1m / 39.37in length allows flexible server-to-enclosure wiring
- Server-grade shielding reduces signal loss and electromagnetic interference
Internal to external SAS conversion
This SMUGDESK cable converts an internal Mini SAS HD SFF8643 port to an external SFF8088 female connector using an integrated PCBA board. It enables direct attachment of external drive enclosures or JBOD units to server backplanes. The 1m length provides reach for typical rack wiring paths. Shielded construction supports steady 6Gbps SAS data transfer.
Suited for server storage expansion
Administrators adding external capacity to existing internal RAID controllers will find the SFF8643 to SFF8088 bridge practical. It is not intended for installations that require an internal SFF8643 to internal SFF8643 link. Buyers needing longer runs or active signal extension should evaluate alternative cabling solutions.
PCBA female connector defines compatibility
The integrated PCBA female SFF8088 end dictates that the mating external cable must present a male SFF8088 plug. Verify the target enclosure or JBOD port gender before purchase, as a gender mismatch will prevent connection.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 60% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does 6Gbps mean when the cable is installed in a server?
It sets the maximum throughput at six gigabits per second for each lane between the internal Mini SAS HD port and the external enclosure.
Which interface standard does the SFF8643 to SFF8088 link follow, and what does it limit?
The cable follows the SAS 6Gbps standard, so the link speed caps at six gigabits per second per lane regardless of faster drives.
What physical space and connectors are needed to fit this 1m cable?
You need an internal SFF8643 Mini SAS HD header inside the chassis and an external SFF8088 female port on the enclosure, with enough clearance for the 39.37in length.
More in SAS, SCSI, InfiniBand & MCIO Cables





