SMUGDESK Mini SAS SFF8087 to 4Port SATA Cable for Server
Converts a Mini SAS SFF8087 port into four SATA ports with shielded wiring for stable server RAID connections
- One SFF8087 port splits into four SATA ports
- High-speed stable data transmission for RAID controllers
- Server-grade shielding reduces signal loss and interference
- Designed for internal rackmount server backplane wiring
- Plug-and-play installation for storage expansion and upgrades
Breakout cable for SAS-to-SATA server wiring
This SMUGDESK cable converts one Mini SAS SFF-8087 port into four independent SATA connectors. It is built for internal rack-mount servers and backplane wiring where SATA hard drives or solid-state drives attach to a SAS RAID controller. The shielded construction reduces signal loss, crosstalk and electromagnetic interference during high-speed data transfer.
Suits server builders expanding SATA storage
Installers who need a plug-and-play link between a single controller port and up to four SATA drives will find this cable matches the task. It is not for systems that lack an SFF-8087 port, nor for configurations that require more than four SATA connections per Mini SAS interface.
One Mini SAS SFF-8087 plug fans out to four SATA
The 1-to-4 breakout topology is the decisive specification: each cable provides exactly four SATA data connections from a single 8087 connector. Verify that the host controller presents an SFF-8087 port and that the target drives use standard SATA interfaces before ordering.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 60% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the SFF-8087 end need a specific port orientation on my RAID controller?
The Mini SAS SFF-8087 connector is keyed and inserts one way only; align the notch with the controller port before pressing it in firmly.
What is the most common mistake when routing the four SATA tails to the drives?
Builders often fold the breakout wires too tightly behind the backplane, stressing the crimp joints; leave a gentle service loop so each SATA plug seats straight.
When should I replace this cable in a production server?
Swap it out if the shielding shows cuts, the latch tabs snap off, or SMART logs start reporting intermittent CRC errors on the attached SAS or SATA drives.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
BUCIER H0207 SFF-8643 to (4) SFF-8482 SAS cable 12Gb/s
- 12 Gbit/s
- Male-to-Male
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
10Gtek 12G External Mini SAS HD SFF-8644 to SFF-8644 Cable 2-m
- Cable Connectors
- Black





