SMUGDESK SlimSAS SFF8654 8i 8X Gen 4.0 Cable .8m
Connects SAS or NVMe devices at 24Gbps with anti-misdirection protection and 32AWG shielding in a .8m Gen 4.0 SFF-8654 8i cable
- Gen4 SlimSAS SFF8654 8i 8X interface delivers up to 24Gbps data transmission
- Anti-misdirection structural design prevents reverse insertion and protects server hardware
- 32AWG copper conductors minimise signal loss for stable long-term integrity
- 8m compact length enables clean internal routing in dense server chassis
- Professional server-grade shielding reduces crosstalk and electromagnetic interference
Server-grade interconnect cable
This SMUGDESK SlimSAS cable provides a Gen 4.0 SFF8654 8i 8X link for enterprise servers and storage arrays. It targets administrators building or upgrading high-density internal storage fabrics. The 24Gbps bandwidth suits RAID controller and NVMe SSD deployments.
Anti-misdirection design and shielding
A built-in anti-misdirection structure prevents reverse insertion that could damage server hardware. Premium 32AWG copper conductors and professional shielding reduce signal loss, crosstalk and electromagnetic interference. The .8m length keeps routing tidy inside dense chassis.
Sustained enterprise workloads
Stable signal integrity is maintained over the full link during continuous high-throughput transfers. The cable supports sustained 24Gbps operation without the degradation seen in lesser shielded assemblies. It is not for external runs or installations requiring longer reach.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 70% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the SlimSAS SFF8654 8i 8X Gen 4.0 cable and which step do people get wrong?
Align the anti‑misdirection key on each connector with the port notch, then push straight in until the latch clicks; the common mistake is forcing the plug upside‑down, which the key prevents.
What maintenance or replacement will the 32AWG copper cable need later?
No scheduled maintenance is required; inspect the latch tabs and shielding for damage when the chassis is opened, and replace the cable only if a link drops below 24Gbps.
What limit appears first under sustained use of the 0.8 m Gen 4.0 interconnect?
The 24Gbps signalling ceiling is the first hard limit; thermal rise in dense chassis can increase bit errors before the copper itself degrades.
More in SAS, SCSI, InfiniBand & MCIO Cables





