VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a USB 2.0 female port into a 10/100Mbps RJ45 wired LAN connection for laptops, desktops and embedded devices
This SMUGDESK adapter converts a USB 2.0 female port into a standard RJ45 Ethernet socket. It adds wired LAN capability to laptops, desktops or embedded devices that lack a built-in network port. The compact form factor suits office desks, equipment cabinets or on-site maintenance kits. Driver installation may be required depending on the host operating system.
The adapter draws power directly from the USB 2.0 host port and has no fan or active cooling. Silent operation makes it suitable for quiet environments and space-constrained installations. Power consumption remains within standard USB 2.0 limits during normal 10/100Mbps network activity. No separate power supply or configuration is needed for basic connectivity.
Sustained file transfers and debugging sessions run at the rated 10Mbps or 100Mbps fast ethernet speeds without thermal throttling. The passive design maintains stable performance during extended use in typical indoor temperatures. Gigabit speeds are not supported by this USB 2.0 version. Verify driver compatibility for continuous operation on your specific operating system.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Connect the USB 2.0 female end to the host device, then plug an Ethernet cable into the RJ45 male port. The step often missed is checking whether your operating system needs a driver, as some systems require manual driver installation before the adapter is recognised.
The adapter itself has no moving parts or consumable components, so it needs no scheduled maintenance. Replacement is only necessary if the USB 2.0 connector or RJ45 port suffers physical damage or if you later require gigabit speeds, which this 10/100Mbps model does not support.
The 100Mbps fastethernet ceiling is the first limit you will encounter during sustained transfers. Because the adapter is a USB 2.0 device, its maximum throughput is capped at 100Mbps, so large file copies or continuous streaming will saturate the link well before any thermal or CPU bottleneck appears.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?