SMUGDESK USB A to USB C Cable 100W LED Display 6.6ft
A USB-A to USB-C cable that delivers up to 100 watts of power and shows real-time charging speed on a built-in LED display
- 100 W maximum output charges compatible laptops and phones quickly
- built-in LED display shows real-time charging voltage and current
- USB 2.0 480 Mbps two-way data transfer moves files between devices
- 7 A current rating with E-mark chip supports high-power delivery safely
- 6 ft nylon-braided cable reaches distant outlets without tangling
USB A to USB C cable with LED display
The SMUGDESK cable connects a USB-A port to a USB-C device and supports up to 100 W power delivery. It handles USB 2.0 data at 480 Mbps in both directions. The transparent nylon-braided jacket covers a 6.6 ft length.
Build fit: needs a PD wall charger for full speed
The cable requires a compatible fast-charging wall charger to reach its maximum output. It carries an E-mark chip that enables 11 V at 7 A negotiation. No video signal is carried, so it fits charging-and-data roles only.
LED display shows live charging status
A built-in digital readout reports the active voltage and current while charging. This lets the user confirm that fast-charging protocols such as PD, QC, AFC or FCP are active. The display adds no extra software or driver requirements.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 70% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Does the 7 A current rating limit how fast a 100 W laptop can charge?
The cable carries up to 7 A at 11 V, delivering the full 100 W rating when the charger and laptop both support that voltage and current combination.
Will the built-in LED display or the nylon braid cause noticeable heat during all-day charging?
The E-mark chip and braided jacket are designed for sustained 100 W loads; the display draws negligible power, so heat stays low in normal use.
Which charger must I already own to reach the 100 W speed shown on the display?
A USB-A wall charger that supports Power Delivery, QC, AFC or FCP at 11 V / 7 A is required; standard 5 V chargers will only provide slower charging.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 cable 3.3ft 40Gbps 240W Copper
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 1.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek 240W USB4 cable 1.6Ft 40Gbps 8K@60Hz
- USB C to USB C
- USB4










