We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium desoldering pump with black nozzle and push button

Solder Sucker Pump Electric Auxiliary Tool Manual Suction Pump Vacuum Removal Tool

SKU CH-EKKV-995F8

Manual desoldering pump with aluminium body and spring-loaded suction for clearing molten solder from circuit boards

  • Fit and compatibilityOut-Opening, Narrow Stile, Store Front Doors
  • Strong suction clears solder fast with stainless steel push rod and spring
  • Comfortable grip for long sessions from aluminium alloy shell
  • Nozzle resists solvents and heat for reliable desoldering
  • Quick rebound button ejects tin debris to prevent clogging
  • Wide electronics use from circuit pins to appliance repair

Desoldering Pump for Electronics Repair

This manual suction pump removes molten solder from circuit boards during rework and repair. It is built for technicians and hobbyists working on precision devices, integrated circuit pins, and small appliance boards. The tool operates without external power and fits easily into a field kit or bench setup.

Heat-Resistant Nozzle and Aluminium Body

The high-temperature plastic nozzle withstands direct contact with molten solder while the aluminium alloy shell resists heat transfer to the hand. A stainless steel push rod and internal spring deliver instant vacuum pressure with each press. The rebound button clears the nozzle quickly so the tool stays ready for repeated use.

Hand-Held Operation with Electric Iron

The pump is used alongside a separate electric soldering iron: heat the joint, position the nozzle, and press the release button to capture solder. No compressed air, vacuum station, or power cable is required. The lightweight design suits tight workspaces and mobile repair jobs where bench equipment is not available.

How it compares

Measured against everything we stock in Soldering Irons & Stations, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 83% of the 802 comparable items (median $25.99).

Specifications

Compatibility
Fit and compatibilityOut-Opening, Narrow Stile, Store Front Doors

Questions about this item

How do I operate the desoldering pump during a repair job?

Press the operating button down until the piston locks, heat the joint with a soldering iron until the solder melts, then quickly place the nozzle on the molten solder and press the rebound button to suck it up; repeat if needed.

What part will wear out first and need replacement?

The high‑temperature plastic suction nozzle is the consumable that will degrade with repeated heat exposure and should be swapped when it shows melting or blockage.

What limits continuous use of the tool?

The plastic nozzle softens under prolonged high heat, so extended desoldering sessions are constrained by how long the nozzle tolerates the temperature before deforming.

More in Soldering Irons & Stations

Similar items

Soldering

  • Out-Opening, Narrow…
  • Lead Free Compliant
$11.99
0.00014499BTC
In stock