Sony KDS-55A3000 DLP Replacement Lamp
Original Osram PVIP lamp and housing for Sony KDS-55A3000, rated 100-120W 1.0 P22HA with 6000 hours
- Product typeProject Lamp
- Product weight0.999
- Ready-to-install original Osram PVIP lamp & housing
- 100-120 W 1.0 P22HA lamp rated for 6,000 hours
- Exact fit for Sony KDS-55A3000 rear-projection TV
- Lightweight 0.9990 kg unit simplifies replacement
- Industry-leading 240-day warranty covers the lamp
Direct-fit lamp for Sony KDS-55A3000
This replacement lamp ships as a complete housing designed for the Sony KDS-55A3000 rear-projection TV. It arrives new and ready to install without additional tools or alignment steps. The unit uses an original Osram PVIP light source rated at 100-120W 1.0 P22HA. Owners of this specific model can restore factory brightness in minutes.
6 000-hour rated life with 240-day coverage
The lamp is rated for 6 000 hours of typical viewing before brightness drops to half its initial output. That span covers several years of daily evening use in a living-room setting. Heavy all-day operation will reach the limit sooner, so commercial or signage users should plan for earlier replacement. The supplier backs the part with a 240-day warranty period.
Exact model match required
Compatibility is limited to the Sony KDS-55A3000; the housing keying and connector pin-out prevent installation in any other chassis. Builders working on different Sony rear-projection models or on DLP projectors from other brands must source the correct part number for those units. No adapter or firmware update can extend the fit.
How it compares
Measured against everything we stock in DLP TV Lamps & Bulbs, at today’s prices. Recalculated every night.
- Price $56.99
- Cheaper than about 67% of the 8,306 comparable items (median $97.99).
Specifications
| Product | |
|---|---|
| Brand name | Sony |
| Model name | KDS-55A3000-LAMP |
| Part number | KDS-55A3000-LAMP |
| Product type | Project Lamp |
Questions about this item
Will the KDS-55A3000-LAMP fit my existing Sony KDS-55A3000 television without modification?
The lamp and housing assembly is built to the original specifications for the Sony KDS-55A3000, so it installs directly into the set without adapters or changes to the mounting points.
How can I confirm the new lamp is operating correctly once installed?
After fitting the unit, the television should power up with a stable, bright image and no lamp-warning indicators; the rated 6,000-hour life begins from that first successful ignition.
Does the package include only the bare bulb or the complete housing, and are any extra parts required?
The box contains the full lamp-and-housing module (part KDS-55A3000-LAMP) ready to insert; no separate cage, filter or tools are needed for the swap.
More in DLP TV Lamps & Bulbs
Similar items
OSRAM SYLVANIA BP96-00608A dlp replacement lamp
- 100-120 W
- 5,000 h
BenQ EP4227 DLP Replacement Lamp 185 Watt 2,500 Lumens 3,000 Hour
- Project Lamp
OSRAM SYLVANIA LM-500 DLP replacement lamp 100-120W 5000h Hitachi
- 100-120 W
- 5,000 h





