We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single black 1/0 AWG battery cable ten feet long with ring terminals

Spartan Power

Spartan Power 1/0 AWG 10 ft Battery Cable Welding

SKU CH-Z8MV-7B7G7

Single black 10 ft 1/0 AWG battery cable rated to 1000 V with UL-listed crimped terminals

  • 1/0 AWG copper handles high current for inverters and solar
  • 10 ft ready-to-use length fits RV, marine and fleet installs
  • UL 1232/1284/1338/1346/10269 approved for up to 1000 V service
  • RoHS compliant, VW-1 rated and moisture resistant insulation
  • Lifetime crimp warranty covers repair free of charge

Single Black 1/0 AWG Battery Cable

This single black battery cable measures 10 ft and uses 1/0 AWG pure copper conductor. It is assembled in Reno, Nevada and arrives cut to length with adhesive-lined heat shrink and ring terminals ready for immediate installation.

Suits high-current DC wiring in RVs.

The cable is rated for up to 1000 V and meets UL 1232, 1284, 1338, 1346 and 10269 standards with VW-1 and moisture resistance. Buyers who need a paired positive and negative set or a different gauge should look at other options.

Sustained load performance backed by lifetime

The crimp connection carries a lifetime repair warranty if it ever fails under continuous duty. ROHS-compliant insulation resists heat and moisture during extended high-amperage runs in on-grid or off-grid systems.

How it compares

Measured against everything we stock in Welding Equipment & Positioners, at today’s prices. Recalculated every night.

Price $37.99
Cheaper than about 57% of the 1,978 comparable items (median $50.99).

Specifications

Product
Brand nameSPARTAN POWER

Questions about this item

What battery terminal size do I need to match the 3/8 inch ring terminals on this 1/0 AWG cable?

You need battery posts or lugs that accept a 3/8 inch stud or bolt, which is the standard size fitted to these 1/0 AWG cable ends.

Will the adhesive-lined heat-shrink on this cable bond reliably to my existing 4 AWG leads?

Yes, the irradiated polyolefin shrink tubing seals around any clean copper conductor, so it will bond to your 4 AWG wires if they are properly stripped and crimped.

How can I verify the crimp on this cable meets the UL 1232 standard after I install it?

Inspect the crimp for a uniform, void-free compression and confirm the cable carries rated current without heating at the terminal; the lifetime crimp warranty covers any defect.

More in Welding Equipment & Positioners

Similar items