Spartan Power Single Black 1 ft 1/0 AWG Battery Cable
Heavy-duty 1/0 AWG battery cable rated to 1000 V with UL-listed construction and adhesive-lined heat-shrink terminals
- Ready for immediate installation with pre-cut 1 ft length
- Handles high-voltage systems up to 1000 V rating
- Meets multiple UL standards including 1232, 1284, 1338, 1346, 10269
- ROHS compliant and VW-1 rated for moisture resistance
- Lifetime crimp warranty covers free repairs for life
1/0 AWG Battery Cable
This single black cable measures one foot and uses 1/0 AWG pure copper conductor. It is built for high-current DC wiring in automotive, marine, RV and off-grid power systems. The assembly carries UL 1232, 1284, 1338, 1346 and 10269 approvals and is rated for up to 1000V.
Installers needing a short, heavy-gauge link
The one-foot length suits tight battery-to-inverter or jumper connections where minimal voltage drop matters. It is not intended for long distribution runs or installations that require a larger 4/0 AWG conductor.
Rated 1000V with lifetime crimp warranty
The adhesive-lined heat-shrink and VW-1 moisture resistance handle vibration and weather in fleet trucks, boats and solar arrays. The crimp is covered for life, though the fixed one-foot length offers no slack for repositioning.
How it compares
Measured against everything we stock in Welding Equipment & Positioners, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 92% of the 1,978 comparable items (median $50.99).
Specifications
| Product | |
|---|---|
| Brand name | SPARTAN POWER |
Questions about this item
What terminal stud size on my battery or bus bar matches the ring terminals on this 1/0 AWG cable?
This cable is supplied with either 5/16 inch or 3/8 inch ring terminals depending on the gauge, so verify which size your battery posts or bus-bar studs require before connecting.
Can I use this UL 1232 rated cable alongside my existing 4 AWG welding leads without creating a bottleneck?
The 1/0 AWG conductor carries significantly more current than 4 AWG, so it will not restrict flow; simply ensure each connection point is clean and the terminals are tight.
How can I confirm the crimp and heat-shrink seal are sound after I install the cable?
Inspect the adhesive-lined polyolefin heat shrink for full, even recovery around the lug barrel and tug firmly on the cable — no movement at the crimp means the lifetime crimp warranty condition is met.
More in Welding Equipment & Positioners
Similar items
Miller Enterprises 770237 ArcArmor Filter Lens 2" x 4-1/4" Shade 10 PK5
- Welding Protection
Bernard 360-10012 Centerfire Insulator Welding
- H=.765,W=1.15,D=.765
- Rubber
Lincoln Electric KH550 electrode container 14 in 10 lb
- Welding Parts & Sup…





