SQUARE D 9012G Pressure Switch 5-250 PSI Open
Adjustable pressure switch covers 5 to 250 psi with a 7.4 to 33.6 psi differential and NEMA 1 rating
- Product typeLight Switch
- Adjustable pressure range from 5 to 250 psi for versatile system control
- Diaphragm actuation delivers reliable switching across -40 to 250 °F media temperatures
- NEMA 1 rating suits indoor installations in dry environments
- 1/4-18 NPT female port enables direct piping without extra fittings
- 3 A at 240 V AC contact rating handles standard control circuits
Pressure Switch 5-250 PSI
The Square D 9012G is an adjustable pressure switch with a 5 to 250 psi operating range and a 7.4 to 33.6 psi differential. It features a 1/4-18 NPT port, diaphragm actuation and a NEMA 1 enclosure rating. The switch provides one normally open and one normally closed contact for control circuits.
Industrial and HVAC Control
This switch suits installers needing a standard-action device for air, water or oil pressure monitoring within the stated temperature limits. It is not for buyers who require a different port size, a tighter fixed differential or a higher NEMA rating for outdoor or wash-down environments.
Electrical Ratings Included
The contacts are rated at 3 A at 240 V AC, 0.22 A at 125 V DC and 0.27 A at 250 V DC. These ratings determine the maximum pilot-duty load the switch can handle directly. No additional accessories or software are bundled with this unit.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $260.99
- Pricier than about 90% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Square D |
| Product type | Light Switch |
Questions about this item
What piping thread does the 1/4-18 FNPT port on the 9012G pressure switch require?
The switch uses a 1/4-18 FNPT port; you must supply mating pipe or tubing with a matching male NPT thread and sealant.
Can the 9012G replace an older switch that was rated for 250 psi maximum?
Yes, the 9012G covers a 5 to 250 psi range, so it fits systems previously set at the 250 psi limit.
How do I verify the 9012G is actuating at the correct pressure after installation?
Pressurise the system and watch the gauge; the contacts should change state within the 7.4 to 33.6 psi differential band you have set.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated HBL430C7W Watertight Pin & Sleeve Connector 30A 480V IP68 IP69K Red
- Red
- Red
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Hubbell Incorporated HBL430P12W Watertight Pin & Sleeve Plug 30 A
- Orange
- Orange
Hubbell Incorporated Disconnect Switch 30 A 3PST NEMA 12K 3R 15 HP 600 V
- Gray
- Light Switch





