SQUARE D 9013FH Pressure Switch 95-125PSI 4Port Unload
Controls air compressor pressure at 95-125 psi with four ports and unloader valve
- Product typeLight Switch
- Factory-set 95/125 psi cut-in/cut-out for immediate compressor control
- 30 psi differential balances cycling frequency and pressure stability
- Four 1/4 in FNPS ports simplify plumbing and unloader hookup
- DPST contacts handle 1.5 hp at 120 V and 3 hp at 240 V three-phase
- NEMA 1 enclosure suits indoor compressor installations
SQUARE D 9013FH Pressure Switch
This SQUARE D 9013FH pressure switch controls air compressor motors in the 95 to 125 psi range. It features a 30 psi differential and four 1/4 inch FNPS ports with an unloader valve. The NEMA 1 rated enclosure suits indoor installations. It is built for standard action on single and three-phase power systems.
Replaces worn compressor pressure controls
Install this switch when an existing control fails to cut in at 95 psi or cut out at 125 psi. The 30 psi differential restores proper cycling on units rated for 40 to 150 psi operation. It handles up to 1 1/2 hp at 120 V single-phase and 2 hp at 240 V single-phase. Three-phase ratings reach 3 hp at 240 V and 1 hp at 480 V.
Four-port manifold with unloader valve
The four 1/4 inch ports provide connections for tank, gauge, safety valve and unloader line in one block. The integrated unloader bleeds head pressure on shutdown for easier restarts. DPST contacts switch both motor legs simultaneously. The 9013FH series covers the stated horsepower range without additional relays.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $36.99
- Typical for this category: the median of 791 items is $39.99.
Specifications
| Product | |
|---|---|
| Brand name | Square D |
| Product type | Light Switch |
Questions about this item
What size pipe threads do the four ports use?
Each of the four ports is 1/4 in FNPS thread, so fittings must match that size.
How do I wire the DPST contacts for a 120 V single-phase motor?
Connect both poles in series with the motor leads; the switch opens both lines when pressure reaches 125 psi and closes again at 95 psi.
When should I replace the unloader valve on this switch?
Replace the unloader if air leaks continuously from the valve after the compressor stops, indicating the internal seal has worn.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated HBL8300SGA Straight Blade Receptacle 5-20R 20A
- Brown
- Wiring Devices
Leviton Manufacturing Co. 052-10097-008 pull chain switch
GE 60 A 240 V AC Non-Fusible Disconnect Switch DPST NEMA 3R
- Industrial Electric…
Schneider Electric 9001KR2G 30mm green push button
- Green
- Light Switch





