We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft DisplayPort cable with latches on both male connectors

STARTECH

STARTECH DISPLPORT10L DisplayPort cable 10 ft 1.2 4096x2160 60Hz latches

SKU CH-7QFF-XW9HD MPN DISPLPORT10L

A 10 ft DisplayPort 1.2 cable with latching male connectors supports 4096 x 2160 at 60 Hz and 21.6 Gbps bandwidth

  • Cable length10 ft (3.05 m)
  • Connector count2
  • Connector detailsConnector A: 1–20 pin DisplayPort Male Connector B: 1–20 pin
  • Connector genderMale to Male
  • Product typeDisplayPort Cable
  • Product colorBlack

Cable Length 10 Feet

  • 4K 4096 × 2160 at 60 Hz via DisplayPort 1.2
  • Latching connectors prevent accidental disconnection
  • 6 Gbps HBR2 bandwidth carries video and 8-channel audio
  • Double-shielded 28 AWG conductors with nickel-plated contacts resist interference
  • 10 ft CMG-rated PVC jacket meets in-wall fire safety requirements

10 ft DisplayPort 1.2 cable with latches

This 10 ft DisplayPort 1.2 cable connects two DisplayPort-equipped devices using 20-pin male connectors on both ends. The latching mechanism secures each plug so the link stays firm when equipment is moved. It supports digital video up to 4096 x 2160 at 60 Hz and carries up to eight channels of audio in the same cable. The 28 AWG conductors are wrapped in aluminium-Mylar foil with braid beneath a black PVC jacket rated CMG for general-purpose use.

Plug-and-play installation with latching connectors

Push each 20-pin male connector into its port until the latches click; no driver or software step is required. The most common issue is not seating the plug fully, which leaves the latch unengaged and can cause intermittent signal loss. Route the 7.3 mm diameter cable so it is not kinked or pinched behind desks or rack rails. The nickel-plated contacts resist corrosion, but avoid disconnecting repeatedly to keep the latch springs from fatiguing.

Verify port version and cable run before ordering

Confirm both source and display have full-size DisplayPort sockets and that the host can output 4096 x 2160 at 60 Hz over DisplayPort 1.2 HBR2 bandwidth of 21.6 Gbps. The fixed 10 ft length suits typical desktop-to-monitor runs; measure the path to ensure the cable reaches without tension. This cable does not convert to HDMI, DVI or mini DisplayPort, so buyers needing a different connector type or a longer run should select an alternative product.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 60% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameStarTech.com
Model nameDISPLPORT10L
Product typeDisplayPort Cable
Product colorBlack
Ports & slots
Connector count2
Connector detailsConnector A: 1–20 pin DisplayPort Male
Connector B: 1–20 pin DisplayPort Male
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Shipping weight0.22 kg
Package size194 × 165 × 48 mm

Other versions of this model

4 more in the same range

Questions about this item

How can I confirm the cable is delivering 4096 x 2160 at 60 Hz after connecting it?

Check your display settings to verify the active resolution reads 4096 x 2160 and the refresh rate is set to 60 Hz; the cable supports HBR2 bandwidth of 21.6 Gbps for this mode.

What comes with the DISPLPORT10L and what must I provide separately?

The box contains the 10 ft DisplayPort 1.2 cable with nickel-plated 20-pin male connectors on both ends and latches; you only need compatible DisplayPort ports on your source and display.

When should I choose this 10 ft version over a different length?

Select the 10 ft length when your source and display are separated by roughly 3 metres and you need the certified 21.6 Gbps HBR2 bandwidth for 4K 60 Hz.

More in DisplayPort Monitor Cables

Similar items