We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Mini DisplayPort male to DVI-D male cable, 10 ft

STARTECH

STARTECH MDP2DVIMM10B Mini DisplayPort to DVI cable 10 ft

SKU CH-GADT-C9RZ2 MPN MDP2DVIMM10B

Connects a DVI display to a Mini DisplayPort source at up to 1920x1200 or 1080p over a 10 ft passive cable

  • Cable length10 ft (3.05 m)
  • Connector count2
  • Connector detailsConnector A: 1 - Mini-DisplayPort (20 pin) Male Connector B:
  • Connector genderMale to Male
  • Product typeMini DisplayPort to DVI
  • DetailsChipset ID: NXP 3361 Converter Type: Passive Output Signal:

Cable Length 10 Feet

  • Connect a DVI monitor from a Mini DisplayPort source
  • Passive NXP 3361 chipset converts signal without external power
  • 10 ft cable reaches across desk or meeting-room setups
  • Male-to-male connectors fit directly — no extra adapters needed
  • Supports 1920x1200 and 1080p for crisp widescreen output

Mini DisplayPort to DVI cable

This 10 ft cable connects a DVI-D monitor to a Mini DisplayPort source using a passive NXP 3361 chipset. It carries a digital signal only and supports resolutions up to 1920x1200 and 1080p. Male connectors on both ends provide a direct link without extra adapters. Suitable for desktops or laptops with a DP++ port.

Passive converter removes need for active dongle

The built-in passive circuitry converts the DisplayPort++ output to a DVI-D signal without external power. This simplifies cabling for wide-screen monitors and projectors that accept a dual-link DVI digital input. Thunderbolt ports that output DisplayPort signals work with this cable. No driver installation is required on supported operating systems.

Check your source has a DP++ port

Verify the video source provides a DisplayPort++ (DP++) signal; standard DisplayPort-only ports will not drive this passive adapter. Ensure the display accepts a DVI-D digital connection rather than DVI-A or DVI-I analog pins. The 10 ft length suits typical desk setups but may not reach distant ceiling-mounted projectors.

How it compares

Measured against everything we stock in Mini DP Monitor Cables, at today’s prices. Recalculated every night.

Price $30.99
Pricier than about 91% of the 243 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameStarTech.com
Model nameMDP2DVIMM10B
Product typeMini DisplayPort to DVI
Ports & slots
Connector count2
Connector detailsConnector A: 1 - Mini-DisplayPort (20 pin) Male
Connector B: 1 - DVI-D (25 pin) Male
Connector genderMale to Male
Size & build
Cable length10 ft (3.05 m)
Shipping weight0.16 kg
Package size197 × 133 × 23 mm

Other versions of this model

2 more in the same range

Questions about this item

Will the NXP 3361 chipset need replacement after extended use?

The passive converter uses a fixed NXP 3361 chipset with no moving parts or firmware, so no scheduled replacement is required.

What resolution limit appears first during continuous operation?

The cable is rated for a maximum digital resolution of 1920x1200, and that ceiling is reached before any thermal or bandwidth bottleneck occurs.

Does the adapter generate noticeable heat or draw extra power when run all day?

As a passive Mini DisplayPort to DVI-D converter, it draws only the small amount of power supplied by the source port and produces negligible heat during all-day use.

More in Mini DP Monitor Cables

Similar items