We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black trail camera mount with 360° rotation and 220° vertical tilt, 1/4-inch thread and locking knob

Stealth Cam

Stealth Cam Trail Camera Holder 360° 220° vertical

SKU CH-CW97-JFGR0

A compact mount that rotates 360 degrees and tilts 220 degrees to position a trail camera with a 1/4-inch x 20mm thread

  • 360-degree rotation lets you aim the camera in any direction
  • 220-degree vertical tilt covers steep up or down angles
  • Compact low-profile design keeps the mount unobtrusive on the tree
  • 1/4-inch x 20mm thread fits standard trail-camera inserts
  • Locking knob and wing nut secure the chosen position firmly

Trail Camera Mount with Full Rotation

The HME Economy Trail Camera Holder fits any trail camera that uses a standard 1/4-inch x 20mm threaded insert. It mounts on a tree and lets you rotate the camera a full 360 degrees to face the exact area you want to monitor. A locking knob then secures the camera against the mount so the angle cannot shift. The low-profile design keeps the setup discreet in the field.

Silent Fixed Positioning

The holder uses manual wing nuts and a locking knob rather than motors or electronic actuators, so it produces no operating noise and draws no power. Once the 360-degree rotation and 220-degree vertical tilt are set and tightened, the position remains fixed without any energy consumption. There are no fans, pumps or electronic components to generate heat or sound during use.

Replaces Fixed-Angle Tree Straps

This mount replaces basic straps or brackets that only point the camera in a single fixed direction. The upgrade is worth it when you need to aim the camera up, down or around obstacles without remounting the whole unit. It is not suited for users who require remote pan-and-tilt control or automated tracking features.

How it compares

Measured against everything we stock in Mirrorless Camera Bodies & Kits, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 99% of the 683 comparable items (median $1,132.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Stealth Cam trail camera holder on a tree and secure the camera?

Mount the holder to the tree, screw the camera onto the 1/4-inch x 20mm threaded end, rotate to the desired angle using the 360-degree rotation, tighten the camera-locking knob against the camera base, then adjust the 220-degree vertical pivot with the 3/8-inch wing nut and re-tighten.

What maintenance will the camera-locking knob and vertical wing nut need over time?

Periodically check both the camera-locking knob and the 3/8-inch wing nut for tightness, as vibration and weather cycling can loosen them; re-tighten by hand to maintain the set position.

What is the maximum vertical adjustment range before the holder hits its mechanical limit?

The vertical adjustment provides 220 degrees of pivot; the mechanical stop is reached at that limit, preventing further tilt.

More in Mirrorless Camera Bodies & Kits

Similar items