We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four white 1kg spools of 1.75mm PETG filament in a box

SUNLU High Speed PETG Filament 1.75mm 4kg White 4-pack

SKU CH-FSAE-S1XCN

Four 1 kg spools of 1.75 mm PETG filament for high-speed printing up to 600 mm/s with enhanced toughness and impact strength

  • Diameter1.75
  • Product color4kg White+white+white+white
  • Main materialPolyethylene Terephthalate Glycol
  • Product weight4 kg
  • Print up to 600 mm/s with enhanced fluidity
  • Combines PLA ease of use with ABS-like durability
  • High impact resistance withstands bumps and drops
  • Four 1 kg spools give 4 kg total material
  • Recommended bed temperature 70–80 °C for reliable adhesion

Four 1kg white PETG spools

This pack supplies four kilograms of SUNLU High Speed PETG filament in white, split across four 1kg spools. The material is Polyethylene Terephthalate Glycol with a 1.75mm diameter. It is aimed at makers who need a large volume of tough, impact-resistant filament for functional parts and high-speed printing.

Check nozzle and bed temperature range

Your printer must reach a nozzle temperature between 230 and 270 degrees and a heated bed temperature between 70 and 80 degrees. The spools use a standard 1.75mm diameter, so verify the extruder and Bowden path accept this size. Ensure the firmware can handle print speeds up to 600mm/s if you plan to use the highest speed settings.

Thermals and power in normal use

Printing at 50 to 100mm/s uses a nozzle temperature of 230 to 240 degrees, while 100 to 300mm/s requires 240 to 255 degrees and 300 to 600mm/s needs 255 to 270 degrees. Higher speeds demand more heater power and effective part cooling to maintain layer adhesion. The bed stays at 70 to 80 degrees throughout, so sustained bed heating is required.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $60.99
Pricier than about 90% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameSUNLU
Model nameHigh Speed PETG Filament 1.75 mm
Product color4kg White+white+white+white
Size & build
Main materialPolyethylene Terephthalate Glycol
Diameter1.75
Product weight4 kg

Questions about this item

What comes in the 4 kg white pack and is anything else required to start printing?

The pack contains four 1 kg spools of 1.75 mm white PETG filament. You will need a compatible FDM 3D printer and a dry storage container; no other consumables are included.

Why choose the 4 kg white bundle instead of a single 1 kg spool?

The bundle gives four 1 kg spools of the same white PETG, reducing spool changes during long prints and keeping colour consistent across large or multi-part projects.

What does the 600 mm/s headline speed mean for my actual prints?

It is the maximum rated speed; the manufacturer recommends 50–100 mm/s at 230–240 °C, 100–300 mm/s at 240–255 °C, and 300–600 mm/s only at 255–270 °C with a 70–80 °C bed.

More in 3D Printer Filament

Similar items