We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A spool of shiny light-gold silk PLA filament 1.75mm 1KG

SUNLU Silk PLA Filament 1.75mm Light Gold 1KG

SKU CH-399E-MB87V

Silk PLA filament with a glossy, smooth surface that prints without polishing, 1.75 mm diameter, ±0.02 mm tolerance, 1 kg spool

  • Diameter1.75
  • Product color1000g Light Gold
  • Main materialSilk Single Color
  • Product weight1 kg
  • Glossy silk finish removes the need for polishing
  • ±0.02 mm tolerance and 330 m length ensure consistent feeding and fewer jams
  • Neatly wound spool with mechanical winding and manual checks prevents knots and breaks
  • Low shrinkage and strong interlayer adhesion at 205–215 °C nozzle and 60–80 °C bed
  • 1 kg spool of 1.75 mm Silk PLA in Light Gold for decorative prints

Silk PLA filament for decorative prints

SUNLU Silk PLA filament in Light Gold delivers a glossy, smooth surface straight from the nozzle without any post-processing. The 1.75 mm diameter spool weighs 1 kg and holds approximately 330 m of material. Dimensional tolerance is held to ±0.02 mm for consistent extrusion.

Works with standard 1.75 mm extruders

The material feeds cleanly on most FDM printers that accept 1.75 mm filament and support a heated bed. Recommended nozzle temperature is 205–215 °C with a bed temperature of 60–80 °C. Print speeds of 30–60 mm/s keep layer adhesion strong and warping low.

Neatly wound spool reduces knots and snags

Each spool is mechanically wound and manually inspected so the filament unwinds smoothly during long prints. The tidy winding minimises tangles that can cause extruder jams or print failures. No additional accessories or software are included in the package.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $27.99
Typical for this category: the median of 305 items is $27.99.

Specifications

Product
Brand nameSUNLU
Model nameDCUS-SILK-LG-1KG
Product color1000g Light Gold
Size & build
Main materialSilk Single Color
Diameter1.75
Product weight1 kg

Questions about this item

What is the dimensional accuracy of this filament and how does it affect sustained printing?

The filament has a tolerance of ± 0.02 mm, which helps maintain consistent feeding and reduces clogging during long prints.

What are the recommended nozzle and bed temperatures for all-day printing with this Silk PLA?

The recommended nozzle temperature is 205-215 °C and the heated bed should be set to 60-80 °C for optimal results.

What 3D printer specifications are required to use this 1.75 mm filament?

Your printer must support 1.75 mm diameter filament and be capable of reaching a nozzle temperature of at least 215 °C and a bed temperature of 80 °C.

More in 3D Printer Filament

Similar items