STARTECH PEXESAT322I PCIe x1 SATA III 6.0Gb/s 2 Int/2 Ext RAID controller
- Low Profile Ready
- PEXESAT322I
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds four NVMe drives through SFF-8643 connectors on a PCIe 3.0 x16 low-profile card
This Supermicro AOC-SLG3-4E4R-O is a PCI Express 3.0 x16 host bus adapter that adds four internal NVMe connections through SFF-8643 ports. It targets enterprise servers needing dense, high-speed flash storage in a low-profile slot. The card suits near-line cache tiers where data stages before moving to backend arrays.
Each of the four ports operates at up to 12.8 Gb/s using PCIe 3.0 signalling, so aggregate bandwidth scales with the number of attached drives. The on-board redriver maintains signal integrity over the SFF-8643 cables during continuous read and write streams. Thermal load stays within the low-profile envelope without requiring active cooling on the card itself.
Installation is a single x16 insertion; the 2.7-inch height fits standard low-profile brackets. The only common issue is mismatching the SFF-8643 pin-out to the backplane or using cables rated below the 12.8 Gb/s lane speed, which caps performance. Verify the server BIOS exposes the x16 link at Gen 3 before deployment.
Measured against everything we stock in RAID & Drive Controller Cards, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product type | SAS Controller |
| Ports & slots | |
| Interface type | PCI Express |
| Size & build | |
| Form factor | Plug-in Card |
| Shipping weight | 3.18 kg |
| Package size | 260 × 194 × 73 mm |
The low-profile card uses a PCIe 3.0 x16 redriver design with no active cooling, so thermal output stays minimal inside a server chassis with normal airflow.
You need four SFF-8643 (Mini SAS HD) to U.2 or U.3 cables, or a backplane with matching SFF-8643 receptacles, to attach the NVMe drives.
The adapter is PCIe 3.0 x16 and will fall back to PCIe 2.0 speeds if installed in a Gen-2 slot, halving the 12.8 Gb/s aggregate bandwidth.
More in RAID & Drive Controller Cards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?