Kingston Technology Corp. SEDC600M/480G 480 GB enterprise SSD
- 480 GB
- SATA III
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
128 GB SATA III enterprise SSD delivering up to 520 MB/s reads and 180 MB/s writes in a compact SuperDOM module
The Supermicro SSD-DM128-SMCMVN1 is a 128 GB enterprise solid-state drive built in the SuperDOM form factor. It plugs directly into a server board SATA connector to provide boot or cache storage without occupying a drive bay. Sequential reads reach up to 520 MBps and writes up to 180 MBps over the SATA III interface.
This module fits administrators who need a low-power, direct-attached SATA drive for operating-system boot or light logging in space-constrained servers. It is not for workloads demanding higher write throughput or larger capacities, and it cannot serve applications that require a 2.5-inch or M.2 form factor with cabled installation.
The drive connects through a standard SATA III port and draws a typical 1.6 W during write operations while idling at 0.27 W. This single interface and power profile determine compatibility with the target server board and the thermal budget of the deployment.
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Supermicro |
| Product line | SuperDOM |
| Model name | SSD-DM128-SMCMVN1 |
| Total capacity | 128 GB |
| Performance | |
| Sequential read speed | Up to 520 MB/s |
| Sequential write speed | Up to 180 MB/s |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.27 W |
| Active power draw | Typical Read: 1.4 W Typical Write: 1.6 W |
| Size & build | |
| Shipping weight | 0.02 kg |
| Package size | 89 × 64 × 6 mm |
Idle power is 0.27W; typical read is 1.4W and typical write is 1.6W, so heat output stays very low even under constant load.
It plugs directly into a standard SATA III port on the motherboard; no extra cables, brackets or power leads are required.
The drive is backward compatible with SATA II ports, but sequential reads will cap at the port's 3 Gb/s limit instead of the rated 520 MBps.
More in Server & Data Center SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?