SuppliesMax CNMFM3-8137-000 waste toner cartridge 15000 pages

Waste toner container for Canon imageRUNNER ADVANCE

The SuppliesMax CNMFM3-8137-000 is a new compatible waste toner container rated for 15000 pages at 5% coverage. It replaces the Canon FM3-8137-000 and FM3-8137-020 units in the imageRUNNER ADVANCE C2020, C2020i, C2025, C2025i, C2030, C2220i, C2225 and C2230 series. Offices that run high-volume colour jobs on these devices can swap the container without calling a technician. It is not for printers outside the listed Canon models or for users who need a toner supply cartridge instead of a waste receptacle.

Tool-free swap in seconds

The container slides into the designated waste toner slot and locks with a single latch, so no screws or special tools are required. Most installations finish in under a minute. The main issue occurs when the old container is pulled out at an angle, spilling residual toner inside the machine; keeping the unit level during removal avoids the mess. If the printer still reports a full waste tank after replacement, reseat the container until the latch clicks firmly.

Verify the exact model number first

Before ordering, confirm that your device shows the part number FM3-8137-000 or FM3-8137-020 on the supplies status screen or service manual. The container is white and matches the OEM dimensions for the C2020 through C2230 range, but other Canon imageRUNNER models use different waste toner housings that will not fit. Cross-reference the Katun 39171, Katun 55532, Xerox 008R13285 or Clover CIGWBL3531 numbers only if your service documentation lists them as direct equivalents.