SXDOOL MC35101V2-000C-A99 35mm case fan 12V 7500RPM 6.5CFM 2-pin

Compact 35mm case fan for tight builds

This 35mm square frame fits small-form-factor chassis and embedded boards where larger fans cannot mount. It runs on 12V DC power and draws 0.52W at a rated 7500RPM, pushing 6.5CFM of airflow. The 2-pin connector supplies power without speed reporting or PWM control. Buyers needing variable speed or tachometer feedback should choose a 3-pin or 4-pin model instead.

Two-pin power cable and short lead

The unit ships with a 2.0mm pitch 2-pin plug and a 4cm wire tail. No mounting screws, rubber grommets, adapters or software utilities are included. The short lead reaches nearby headers on compact boards but will not stretch to distant fan connectors in full-size cases. Installers must supply their own fixings and any extension cables required.

Simple screw mount with limited clearance

Four corner holes accept standard M3 screws for direct attachment to chassis or heatsink brackets. The 10mm frame depth leaves minimal room behind the rotor, so cable routing and adjacent components must be checked before tightening. The fan spins at 7200RPM ±10% and produces 22DBA; vibration can appear if screws are overtightened or the mounting surface is uneven.