We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver chassis with front LCD screen and 119 USB ports

Systor

Systor 1 to 119 USB 3.0/3.1 Duplicator & Sanitizer

SKU CH-J2VN-VTDB4

Standalone USB 3.0/3.1 duplicator and sanitizer copies up to 119 drives simultaneously at 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • Target range1 to 119
  • Transfer speed100 MB/sec
  • Operating modeStandalone

Target Size 1 to 119

Show 7 more

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to 119 USB targets simultaneously
  • Asynchronous and synchronous copy modes supported
  • Bit-by-bit hardware comparison verifies every duplication
  • Erase function conforms to DoD data-security standards

Standalone USB duplicator for high-volume workflows

The Systor duplicator copies one source flash drive to as many as 119 targets without a host computer. It reaches up to 100 MB per second, or roughly 6 GB per minute, using USB 3.0 and 3.1 interfaces. Bit-for-bit hardware comparison verifies every copy, and three erase modes meet DoD sanitisation standards. The four-key LCD interface handles synchronous and asynchronous copy modes.

Check target count and drive compatibility before

You need up to 119 USB flash drives available for simultaneous duplication. Each target must be a standard USB storage device; the unit does not support other media types. No PC, software or specific operating system is required because the duplicator runs its own multi-core processor. Ensure the source drive uses a file system the unit can read, such as FAT or FAT32, for system-and-file or whole-media copy modes.

Rack-ready chassis with front-access ports

The standalone chassis is built for repeated insertion and removal of up to 119 drives at the front panel. Bright LCD feedback shows real-time progress, capacity and error status for every channel. Asynchronous operation lets you swap finished targets while other ports keep copying, reducing downtime. Hardware-based erase and compare functions run independently of any host, so the unit stays reliable during extended production runs.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $11,071.99
Pricier than about 94% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Performance
Transfer speed100 MB/sec
More details
Target range1 to 119
Operating modeStandalone

Other versions of this model

5 more in the same range

Questions about this item

Does the Systor duplicator ship with the 119 target USB ports populated, or must I add them separately?

The unit is a complete standalone duplicator with 1 to 119 target ports built in; no extra ports or computer are required.

Which copy mode — synchronous or asynchronous — should I choose for the fastest 100 MB/s duplication?

Asynchronous mode lets each channel load, unload and copy independently, so you can keep all 119 targets running at the full 100 MB/s rate without waiting.

What does the 6 GB per minute headline speed mean when I plug in real USB 3.1 flash drives?

It is the maximum hardware throughput; actual throughput per drive depends on the flash media, but the duplicator sustains up to 100 MB/s per channel during bit-for-bit copy and compare.

More in Disc, USB & SD Duplicators

Similar items