We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone USB duplicator with LCD screen and seven slots

Systor

Systor SYSUSB30100-7 1-to-7 USB 3.0/3.1 Duplicator

SKU CH-F15Q-3HBC5

Standalone USB duplicator copies one source to seven targets at up to 100 MB/s with LCD control and bit-for-bit verification

  • Target range1 to 7
  • Buffer size256M
  • Supported mediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Transfer speed100 MB/sec
  • Supported languagesEnglish or Japanese
  • Display typeLCD Screen

Target Size 1 to 07

Show 7 more

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation with no computer required
  • Copy speeds up to 100 MB per second
  • Supports USB 1.1 through USB 3.1 drives
  • Bit-by-bit compare verifies every duplication
  • LCD interface with synchronous and asynchronous modes

Standalone USB 3.0/3.1 Flash Duplicator

The Systor SYSUSB30100-7 is a standalone duplicator that copies one source USB flash drive to up to seven targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a transfer rate of 100MB/sec. An integrated LCD screen and four-key panel control all operations.

Suited for high-volume USB copying.

This unit suits IT departments, duplication services and OEMs that need rapid, simultaneous cloning of USB flash drives in FAT16, FAT32, NTFS or Linux file systems. It does not support optical discs, hard drives, memory cards or network-attached workflows. Buyers requiring software-driven imaging or non-USB target interfaces should consider a different device.

Seven target ports with asynchronous operation

The defining specification is the 1-to-7 target configuration combined with asynchronous copy mode, allowing each channel to load, unload and copy independently. Buffer memory of 256M and bit-for-bit hardware comparison ensure reliable duplication across all seven slots.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $943.99
Cheaper than about 65% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSystor
Model nameSYSUSB30100-7
Product typeUSB Flash Drive Duplicator
Panel colorBlack
Performance
Transfer speed100 MB/sec
Memory
Buffer size256M
Storage
Loading mechanismSlot
Display
Display typeLCD Screen
Power
Power supply115 V / 230 V
Compatibility
Supported mediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Software
Supported languagesEnglish or Japanese
More details
Target range1 to 7
Operating modeStandalone
Environmental specOperating Humidity: 15% ~ 90%

Other versions of this model

5 more in the same range

Questions about this item

Does the duplicator need a host PC to copy USB 3.0 or 3.1 drives?

No, it operates completely standalone with its own multi-core processor and LCD interface, so no computer or software is required.

Can I mix USB 2.0 and USB 3.0 flash drives in the same copy job?

Yes, the unit supports USB 1.1, 2.0, 3.0 and 3.1 media simultaneously across its seven target slots.

How do I confirm each copy finished without errors?

The built-in bit-for-bit hardware comparison runs after every duplication and the LCD reports pass or fail for each channel.

More in Disc, USB & SD Duplicators

Similar items