We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone USB duplicator with LCD screen and 39 slots

Systor

Systor SYS-USB30-39 USB 3.0/3.1 Duplicator 1 to 39

SKU CH-K2ED-DF6KV

Standalone duplicator copies one USB drive to 39 targets at up to 300 MB/s with bit-by-bit verification

  • Target range1 to 39
  • Buffer size256M
  • Supported mediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Transfer speed300 MB/s
  • Supported languagesEnglish or Japanese
  • Display typeLCD Screen

Target Size 1 to 39

Show 7 more

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 39 USB drives simultaneously
  • Standalone operation requires no host computer
  • 18 GB per minute asynchronous duplication speed
  • Bit-by-bit compare verifies every copy
  • LCD with four-key control simplifies operation

USB 3.0/3.1 Duplicator — 1-to-39 targets

This standalone unit copies one USB flash drive to up to thirty-nine targets at once. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches up to 300 MB/s transfer speed. A 256 MB buffer and LCD control panel let the operator run quick or whole-media copies without a host computer. Bit-by-bit compare verifies every duplication.

Suited for high-volume USB duplication.

IT departments, duplication services and OEMs that need to provision dozens of flash drives in a single run will benefit from the thirty-nine synchronous and asynchronous channels. Buyers who need to duplicate SD cards, optical discs or internal drive formats should look at a different product. The unit only accepts USB flash drives inserted into its front-loading slots.

39-target capacity decides fit

The single specification that determines suitability is the maximum target count of thirty-nine. If the workflow requires more simultaneous copies, this duplicator cannot meet the demand; if fewer targets are typical, the extra ports remain available for future scaling. No other figure in the data sheet changes this core constraint.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $11,740.99
Pricier than about 94% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSystor
Model nameSYS-USB30-39
Product typeUSB Flash Drive Duplicator
Panel colorBlack
Performance
Transfer speed300 MB/s
Memory
Buffer size256M
Storage
Loading mechanismSlot
Display
Display typeLCD Screen
Power
Power supply115 V / 230 V
Compatibility
Supported mediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Software
Supported languagesEnglish or Japanese
More details
Target range1 to 39
Operating modeStandalone
Environmental specOperating Humidity: 15% ~ 90%

Other versions of this model

5 more in the same range

Questions about this item

What type of USB flash drives do I need to use as source and targets for the Systor SYS-USB30-39?

The duplicator supports USB 1.1, 2.0, 3.0, and 3.1 flash drives for both the source and up to 39 target ports.

Can I mix older USB 2.0 drives with newer USB 3.1 drives during the same copy session?

Yes, the unit handles mixed USB 1.1, 2.0, 3.0, and 3.1 media simultaneously across its 39 target slots.

How do I verify that each target drive is an exact match of the source after the copy finishes?

The LCD screen runs a bit-by-bit compare function and displays the verification result for every port once the operation completes.

More in Disc, USB & SD Duplicators

Similar items