We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 3-prong dryer power cord with right-angle plug and eyelet terminals

TAURKENAM

TAURKENAM 30-Amp 3-Prong Dryer Cord 5ft 1022

SKU CH-VZWG-18NN8

A 30-amp, three-prong dryer cord with right-angle plug, eyelet connectors and 5-foot length for 125/250-volt appliances

  • Right-angle plug lets dryer sit closer to wall without cord damage
  • Eyelet connectors slip over terminal screws for a secure, snug fit
  • Rated 125/250 volts for standard 30-amp, three-wire dryer installations
  • UL listed confirming thorough safety testing
  • Five-year limited warranty covers replacement if cord fails prematurely

Right-Angle 3-Prong Dryer Cord

The TAURKENAM 30-Amp appliance cord connects electric dryers with a three-wire configuration. Its right-angle plug head lets the dryer sit close to the wall without bending or crushing the cable. Eyelet connectors slip over terminal screws for a secure, code-compliant installation. The five-foot length suits standard laundry-room layouts.

Thermals Noise and Power Draw

The cord carries 30 amps at 125/250 volts through three 10-gauge copper conductors. Copper wiring keeps resistance low so the cord runs cool during normal dryer cycles. No moving parts or electronics mean silent operation and zero standby power draw. UL listing confirms the assembly meets safety standards for continuous household use.

30-Amp 3-Wire Compatibility Decides Fit

This cord only fits dryers that require a 30-amp, three-prong, 125/250-volt connection with eyelet terminals. Buyers whose appliances need a four-prong plug or a different amperage rating cannot use this part. Check the dryer's nameplate or manual for the exact voltage and prong configuration before purchasing.

How it compares

Measured against everything we stock in Worksite Lighting, at today’s prices. Recalculated every night.

Price $24.99
Pricier than about 60% of the 22 comparable items (median $22.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the right-angle plug and eyelet connectors on this 30-amp dryer cord without crushing the cord?

Insert the three 10-gauge wires through the dryer terminal block, place each eyelet connector over its matching screw, tighten firmly, then route the right-angle plug flat against the wall so the cord exits sideways without bending.

What maintenance will the eyelet connectors and copper conductors need after several years of dryer cycles?

Once a year, unplug the cord, remove the terminal-block cover, and check that each eyelet connector is still tight on its screw and that the copper shows no discoloration or corrosion.

At what load does the 10-gauge copper reach its thermal limit during continuous dryer operation?

The cord is rated for 30 amps at 125/250 volts; sustained current above 30 amps will cause the 10-gauge conductors to exceed their temperature rating.

More in Worksite Lighting

Similar items