Techly 2-Arm Tilt Swivel TV Wall Mount 42-70in
Wall mount holds 42 to 70 inch TVs up to 70 kg with tilt, swivel and extendable arms
- Mounting typeWall Mount
- Supported TV size< 40 in
- Product colorBlack
- Supports TVs from 42 to 70 inches
- Holds up to 70 kg for secure mounting
- Tilts 12° down to reduce glare
- Swivels up to 90° for flexible viewing
- Extends 430 mm from wall with dual arms
Fits 42 to 70 inch displays
This Techly wall mount holds LED and LCD televisions between 42 and 70 inches. Two extendable arms provide tilt and swivel movement for flexible viewing angles. The bracket supports VESA patterns up to 800 x 400 mm and carries a maximum load of 70 kg. It ships in black with all necessary screws and anchors included.
Replaces fixed or single-arm brackets
The dual-arm design replaces static flat mounts or single-arm units that cannot swivel. Tilt adjustment ranges from 0 to -12 degrees and swivel reaches up to 90 degrees, so the screen can be angled for corner seating or glare reduction. The jump is worth it when the TV must pull out to 430 mm from the wall or sit as close as 70 mm.
Simple installation with common tools
A bubble level is supplied to help achieve a straight mount, and the bracket can be installed at an angle if required. Fixing accessories including screws and anchors are in the box, so no separate hardware purchase is needed. The main difficulty is locating solid wall studs or suitable masonry for the 70 kg rating; hollow plasterboard alone will not hold the weight safely.
How it compares
Measured against everything we stock in TV Wall Mounts & Install Kits, at today’s prices. Recalculated every night.
- Price $98.99
- Pricier than about 75% of the 1,540 comparable items (median $47.99).
Specifications
| Product | |
|---|---|
| Brand name | Techly |
| Product color | Black |
| Size & build | |
| Mounting type | Wall Mount |
| Compatibility | |
| Supported TV size | < 40 in |
Questions about this item
What VESA hole patterns up to 800 x 400 mm does this mount support?
The bracket fits any VESA pattern up to 800 x 400 mm, covering most 42-70 inch screens.
Which step do people skip when mounting the two extendable arms to the wall plate?
Many forget to tighten the arm-to-plate bolts before hanging the TV; do it while the plate is on the floor.
How often should I re-tighten the 70 kg-rated lag bolts into the wall studs?
Check the lag bolts after the first week, then every six months to keep the 70 kg capacity secure.
More in TV Wall Mounts & Install Kits
Similar items
Kanto PS300 Full Motion TV Mount 26-60in 88lb 22in Extend Black
- Articulating/Full M…
- < 60 in
SAMSUNG TV Stand Legs with Screws for UN32J4000 UN32M4500 UN32N5300
ECHOGEAR EGLF3 Full Motion TV Mount 43-82" 130 lbs
- New & Improved - 16…
- Wall Mount





