We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit C14 to Dual 90° C13 Y Splitter 30 cm 18 AWG

SKU CH-XX7W-GG9PC

A 30 cm Y-splitter with a C14 male plug and two right-angled C13 female sockets, using 18 AWG copper conductors rated for 10 A at 125 V or 2.5 A at 250 V

  • Connector count3
  • Connector detailsC14 to 90 Degree Angled 2XC13 Power Splitter Cord, IEC 320 C
  • Connector genderC14 to 2X C13 Short Power Y Type Splitter Adapter Cable Cord
  • Conductor typeCopper Conductor
  • Product typeC14 to Dual C13 Short Power Y Type Splitter Adapter Cable Co
  • Product colorBlack

Length 1.5 ft.

  • Powers two devices from one C14 inlet with a 30 cm Y-splitter
  • Right-angled C13 plugs fit tight spaces and reduce cable strain behind equipment
  • 18 AWG oxygen-free copper conductors rated 10 A at 125 V or 2.5 A at 250 V
  • Standard IEC 320 C14 male to dual C13 female connectors suit computers and monitors
  • Compact 30 cm length keeps rack and workstation cabling tidy

Single C14 to dual angled C13 splitter

This 30 cm Y cable converts one IEC 320 C14 inlet into two right-angled C13 outlets, letting you power two devices from a single PDU or UPS port. The 18 AWG copper conductors are rated for 10 A at 125 V or 2.5 A at 250 V. It suits workstations, servers and network gear that use standard IEC 320 connectors.

90-degree elbows reduce rear clearance

Each C13 socket bends 90 degrees, so cables run parallel to the chassis instead of projecting straight back. This saves space in crowded racks and prevents the plug from pressing against a wall or adjacent hardware. The short 30 cm tail keeps excess slack off the floor while still reaching neighbouring outlets.

Oxygen-free copper for stable delivery

The three-core 0.75 mm² wires use 100 % oxygen-free copper, lowering resistance and heat under continuous load. No extra software, adapters or mounting hardware are included — just the single splitter cord in the box. Builders who need longer reach or more than two branches will need a different cable.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeC14 to Dual C13 Short Power Y Type Splitter Adapter Cable Cord
Product colorBlack
Ports & slots
Connector count3
Connector detailsC14 to 90 Degree Angled 2XC13 Power Splitter Cord, IEC 320 C14 Male to 2XC13 Adapter Converter
Connector genderC14 to 2X C13 Short Power Y Type Splitter Adapter Cable Cord
Size & build
Overall length30 cm/1 ft
Conductor typeCopper Conductor

Other versions of this model

3 more in the same range

Questions about this item

What current does the C14 to dual C13 splitter handle at 125 V and at 250 V?

The splitter is rated for 10 A at 125 V and 2.5 A at 250 V, so the total draw of both connected devices must stay within those limits.

How much clearance do the 90-degree C13 elbows need behind my equipment?

Each C13 connector bends 90 degrees at the plug, letting the cable run flat against the chassis and fit in tight rear-panel gaps without protruding straight out.

How do I connect the Y splitter without overloading the single C14 inlet?

Plug the C14 male end into the source inlet, then attach both C13 female ends to the devices; the 18 AWG copper conductors carry the combined load, so verify the total draw stays under the 10 A / 2.5 A rating.

More in Jumper & Adapter Power Cords

Similar items