We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft power extension cord with moulded C8 plug to C7 socket

TeKit

TeKit C8 to C7 Extension Power Cord 6ft 18/2 SPT-2

SKU CH-NWXB-Z82EJ

A six-foot IEC C8-to-C7 extension cord with 18 AWG copper conductors, double shielding and UL/cUL certification rated for 125 V AC at 10 A

  • Connector count2
  • Connector detailsC7 to C8 USA with 18/2 SPT-2 Extension Power Cord, IEC 60320
  • Connector genderMale to Female
  • Cable shieldingDouble-shielded
  • Conductor typeCopper Conductor
  • Product typeCable Connectors

Length 6 ft.

  • Extends reach by 1.8 metres with a six-foot cable
  • Handles up to 125 volts AC and 10 amps for safe power delivery
  • Double-shielded copper conductors reduce interference and ensure reliable signal
  • UL and cUL listed plus RoHS and REACH compliant for certified quality
  • Individually Hi-Pot tested to guarantee freedom from opens, shorts and miswires

Extension cable for C7-powered devices

This new TeKit cord extends the reach of any appliance or power supply that uses an IEC 60320 C7 inlet by 1.8 metres. It carries a male C8 plug on one end and a matching female C7 receptacle on the other, built with 18 AWG copper conductors and a double-shielded PVC jacket rated to 70 °C.

For setups that need extra length on a figure-8

It suits home-office equipment, small audio components and laptop chargers that already terminate in a C7 connector. Builders who require a different inlet style or a higher amperage rating than 10 A at 125 V AC should look at other cable types.

IEC 60320 C8 to C7 connectors with 18/2 SPT-2 wire

The cord is UL/cUL listed, RoHS and REACH compliant, and every unit passes a 100 % Hi-Pot test for dielectric withstand, opens, shorts and pin-out. The flat profile measures 3.4 mm by 5.6 mm and contains 41 strands of 0.16 mm copper per conductor.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeCable Connectors
Product colorBlack
Ports & slots
Connector count2
Connector detailsC7 to C8 USA with 18/2 SPT-2 Extension Power Cord, IEC 60320 C8 Plug to C7 Receptacle Male to Female Extension Power Supply Main Adapter Cable
Connector genderMale to Female
Size & build
Overall length6 ft (1.83 m)
Cable shieldingDouble-shielded
Conductor typeCopper Conductor

Other versions of this model

3 more in the same range

Questions about this item

How do I connect the C8 plug to my device's C7 inlet, and which orientation avoids a loose fit?

Align the keyed C8 male plug with the C7 female inlet; the polarised shape only seats fully one way, so press straight in until the moulded 35P PVC body sits flush.

Will the 18/2 SPT-2 cord need periodic replacement, and what should I check?

Inspect the PVC jacket for cracks, discolouration or exposed blue and brown conductors; the copper stranding is rated to 70 °C, so replace the cord if insulation damage appears.

What is the maximum continuous load before the 18 AWG conductors hit their thermal limit?

The cord is rated for up to 10 amps at 125 volts AC; sustained loads above 10 amps will exceed the 18 AWG rating and the 70 °C temperature limit.

More in Jumper & Adapter Power Cords

Similar items