TeKit KCD1-101 Rocker Switch 15×21mm 2 Pin SPST ON/OFF 10A/125V 6A/250V Black 10 Pack
Pack of ten black SPST rocker switches rated 10A at 125V and 6A at 250V, 15×21mm snap-in size
- Adapter typeRocker Switch On / Off Push Snap-In Button
- Product colorBlack
- DetailsRocker Switch On / Off Push Snap-In Button
- Key featuresRocker Switch On / Off Push Snap-In Button
- In the box10 pcs
- 10-pack gives plenty of spares for multiple projects
- SPST ON/OFF action provides simple power control
- Rated 10A at 125V AC for household appliances
- 6A at 250V AC rating suits higher-voltage equipment
- 15×21 mm snap-in body fits standard panel cut-outs
10-Pack SPST Rocker Switches for DIY Power Control
This pack contains ten KCD1-101 single-pole single-throw rocker switches rated at 10 amps at 125 volts AC and 6 amps at 250 volts AC. They suit hobbyists, repair technicians and small-appliance builders who need a simple on-off power interface for mains-voltage projects.
Snap-In Mounting With Solder Lugs
Each switch body measures 21 by 15 millimetres and fits a standard rectangular panel cut-out for quick installation. The two solder lug terminals provide a secure connection point for wire leads in typical bench or enclosure wiring.
Replaces Worn Boat-Style Switches In Consumer Gear
These units are direct drop-in replacements for failed rocker switches in household appliances, power tools and custom electronics where the original carried similar current ratings. The upgrade is worthwhile when the existing switch feels loose, arcs internally or no longer latches cleanly.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 58% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Tekit |
| Model name | KCD1-101 |
| Product color | Black |
| Adapter type | Rocker Switch On / Off Push Snap-In Button |
| In the box | |
| In the box | 10 pcs |
Questions about this item
How do I snap the KCD1-101 into a 15×21 mm panel cut-out without cracking the housing?
Align the switch body with the 15 mm by 21 mm rectangular opening, press straight in until both side latches click, and avoid tilting during insertion; tilting is the step most people get wrong and can snap the plastic tabs.
Will the silver contacts or spring mechanism need periodic cleaning or replacement?
The switch uses a simple SPST snap-action mechanism with no user-serviceable parts; under normal indoor use the contacts are sealed and require no maintenance, though the entire unit should be replaced if the toggle feels loose or fails to latch.
At what current does the 125 V AC rating become the limiting factor during continuous operation?
The 10 A rating at 125 V AC is the first limit reached; sustained loads above 10 amperes at that voltage will overheat the terminals faster than the 6 A at 250 V threshold.
More in Other Adapters & Couplers
Similar items
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White





