TeKit USB 3.0 Extension Cable Type A Male to Female 6.56 ft 10373
Extends USB 3.0 connections by 6.56 ft with 5 Gbps transfer speed and foil-and-braid shielding
- Connection typeUSB Extension Cable, USB 3.0 High Speed Extender Cord Type A
- Cable length6.56 ft (2.0m)
- Connector count2
- Connector detailsUSB 3.0 Extension Cable
- Connector genderMale to Female
- Conductor typeCopper Conductor
- Extends USB connections by 6.56 ft for flexible device placement
- Supports 5 Gbps data transfer, ten times faster than USB 2.0
- Gold-plated connectors rated for over 10000 insertion cycles
- Foil and braid shielding blocks EMI and RFI interference
- Backward compatible with USB 2.0, 1.1 and 1.0 devices
Extension cable for USB 3.0 devices
This Type A male-to-female cable adds 6.56 ft of reach for peripherals such as VR headsets, consoles, flash drives, hard drives, keyboards, printers and scanners. It works with USB 3.0, 2.0, 1.1 and 1.0 hosts and requires no driver installation. The connectors are gold-plated and rated for more than 10000 insertions.
Sustained throughput and shielding
Copper conductors with foil and braid shielding protect the signal from EMI and RFI interference during long transfers. The USB 3.0 link runs at up to 5Gbps when both ends support the standard, falling back to 480 Mbps on USB 2.0 ports. The braided metal wire core keeps the cable flexible while resisting pull and drag.
Length and backward-compatibility limits
At 6.56 ft the cable stays within the practical range for USB 3.0 signalling without an active repeater. Performance is limited by the host controller; a USB 2.0 port will cap throughput at 480 Mbps regardless of the cable rating. The PVC jacket resists abrasion but the assembly is not rated for in-wall or outdoor use.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 15,227 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | Ugreen |
| Model name | USB Extension Cable, USB 3.0 High Speed Extender Cord Type A Male to A Female |
| Product type | USB Extension Cable, USB 3.0 High Speed Extender Cord Type A Male to A Female |
| Product color | Black |
| Ports & slots | |
| Connection type | USB Extension Cable, USB 3.0 High Speed Extender Cord Type A Male to A Female |
| Connector count | 2 |
| Connector details | USB 3.0 Extension Cable |
| Connector gender | Male to Female |
| Size & build | |
| Cable length | 6.56 ft (2.0m) |
| Overall length | < 12 ft |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Will the 6.56 ft length cause signal loss or extra heat when I run a hard drive all day?
The cable uses copper conductors with foil and braid shielding to maintain the 5 Gbps USB 3.0 rate over 6.56 ft without active electronics, so it adds no measurable heat.
Does my computer need a USB 3.0 Type-A port for this extender to work?
Yes, the male plug is USB 3.0 Type-A; the host must provide a matching Type-A port, though the cable will fall back to USB 2.0 or 1.1 speeds if only those ports are available.
Can I keep using my USB 2.0 printer and scanner through this 3.0 extension cable?
The cable is backward compatible with USB 2.0, 1.1 and 1.0 devices, so older printers and scanners will operate at their native speeds without drivers.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 3.3FT 240W 40Gbps 8K@60Hz Thunderbolt 3/4 black
- USB C to USB C
- USB4
STARTECH USB3SEXT6BK usb cable
- Connector on First…
- Data Transfer Cable
Jansicotek PQ005 USB4 cable 240W 40Gbps 8K 60Hz right angle 3.3FT
- USB C to USB C
- USB4





