We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Half-length PCIe Gen 2.0 x4 capture card with two Cameralink connectors

Teledyne Vision Solutions

Teledyne Vision Solutions Dalsa Xtium CL MX4 acquisition card Cameralink OR-Y4C0-XMX00

SKU CH-935J-FDJJP

Half-length PCIe Gen 2.0 ×4 capture card delivering 1.7 GB/s bandwidth, compatible with CameraLink Rev 2.0, supporting two Base cameras or one Medium/Full/80-bit camera at up to 85 MHz pixel clock

  • Half-length PCIe Gen 2.0 ×4 card delivers 1.7GB/s bandwidth
  • Falls back to PCIe Gen 1.0 slots at 850MB/s rate
  • Cameralink Rev 2.0 compliant with 85MHz pixel clock
  • Captures two Base cameras or one Medium/Full/80bit camera
  • Supports PoCL with mono up to 16bit and RGB up to 12bit

Teledyne Dalsa Xtium CL MX4 capture card

The Teledyne Dalsa Xtium CL MX4 is a half-length PCIe Gen 2.0 ×4 acquisition card built for Cameralink camera systems. It suits machine-vision engineers and integrators who need reliable frame-grabber performance in industrial imaging applications. The card delivers up to 1.7GB/s bandwidth on Gen 2.0 slots and falls back to 850MB/s on Gen 1.0 slots. It targets users acquiring from Base, Medium, Full or 80-bit Cameralink cameras.

Installation notes for the Xtium CL MX4

The half-length form factor fits most standard PCIe slots without bracket modification. Ensure the slot provides Gen 2.0 ×4 electrical connectivity for full 1.7GB/s throughput; Gen 1.0 slots work but limit bandwidth to 850MB/s. Drivers must match the host operating system and Cameralink Rev 2.0 specification. Common issues include insufficient PCIe lane allocation and missing PoCL power configuration for camera supply.

Pre-purchase checklist for the Xtium CL MX4

Verify that your cameras use Cameralink Base, Medium, Full or 80-bit (Deca) interfaces and that pixel clocks do not exceed 85MHz. Confirm mono pixel depths up to 16-bit or RGB up to 12-bit meet application requirements. Check that the host system has a free PCIe ×4 slot (Gen 1.0 or 2.0) and that PoCL support is needed for camera power. The card does not support non-Cameralink interfaces.

How it compares

Measured against everything we stock in Streaming Players & TV Tuners, at today’s prices. Recalculated every night.

Price $772.99
Pricier than about 91% of the 274 comparable items (median $37.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the Dalsa Xtium CL MX4 is capturing at the full 1.7 GB/s after installation?

Check the host system reports a PCIe Gen 2.0 ×4 link and monitor the driver’s throughput counter; sustained rates near 1.7 GB/s confirm the card is operating at its rated bandwidth.

What comes with the Dalsa Xtium CL MX4 and which cables must be purchased separately?

The half-length PCIe Gen 2.0 ×4 capture card is supplied; Camera Link cables for Base, Medium, Full or 80-bit cameras and any PoCL power cables are not included and must be bought separately.

Which camera configuration should I choose — two Base cameras or one Medium, Full or 80-bit camera — for the Dalsa Xtium CL MX4?

Select two Base cameras for dual independent streams up to 85 MHz pixel clock, or one Medium, Full or 80-bit camera when a single higher-tap image up to 16-bit mono or 12-bit RGB is required.

More in Streaming Players & TV Tuners

Similar items