Telemecanique Sensors XCKP2106M12 limit switch cat whisker wobble stick 3A 240V
Top-mounted cat whisker wobble stick actuates at 5.19 in length with 3 A at 240 V AC/DC and 1NC/1NO contacts
- Miniature body fits tight machine spaces
- Cat whisker wobble stick detects multi-direction movement
- 3 A at 240 V AC or DC handles control circuits
- NEMA 1, 2, 4, 6, 12, 13 rated for harsh environments
- 1 NC / 1 NO contacts give flexible wiring options
Miniature Limit Switch for Machine Safety
The Telemecanique Sensors XCKP2106M12 is a miniature limit switch with a cat whisker wobble stick actuator. It provides 1NC/1NO contact operation rated at 3A for both 240V AC and DC circuits. The top-mounted actuator extends 5.19 in and suits position detection on conveyors or guarding.
NEMA-Rated Enclosure Handles Continuous Exposure
The switch body measures 2.56 in high, 1.22 in wide and 1.18 in deep and carries NEMA 1, 2, 4, 6, 12 and 13 ratings. This sealing protects the contacts against dust, water jets and temporary submersion during sustained operation. The boot-sealed actuator option is not fitted on this model.
Verify Mounting Space and Circuit Compatibility
Check that the 5.19 in actuator sweep clears surrounding structure and that the 3A 240V rating matches your control circuit. The miniature body style requires a flat mounting surface with the given width and depth. Buyers needing a sealed actuator boot or a different contact configuration should select another model.
How it compares
Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.
- Price $78.99
- Pricier than about 62% of the 1,098 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | TELEMECANIQUE SENSORS |
Questions about this item
How much heat or power does the 3 A 240 V contact draw when the wobble stick runs continuously?
The contacts are rated for 3 A at 240 V AC or DC; the switch body itself draws no measurable power, so heat is only what the load circuit generates.
What mounting hardware or wiring must I already have to install the 5.19 in whisker on a 1.22 in wide miniature body?
You need two M4 or #8 screws for the 1.22 in wide base, plus suitably rated cable and terminals for 3 A 240 V circuits.
Will the NEMA 1, 2, 4, 6, 12, 13 enclosure seal properly against the same conduit fittings I use on older limit switches?
The body meets all listed NEMA ratings, so it fits standard conduit entries used with earlier NEMA-rated switches; verify thread size matches your existing fittings.
More in Contactors, Relays & Motor Starters
Similar items
SQUARE D LRD14L Thermal Overload Relay 7-10A 690V AC Trip Class 20
TORK nsi DWZ200B Electronic Timer 365 Day SPDT 20A 120-277VAC
- IEC Delay Timers





