We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zamak emergency cable pull switch, rectangular body, grey finish, 7.76 by 2.68 by 1.57 inches, single-end mount, push-button reset

Telemecanique Sensors

Telemecanique Sensors XY2CH13150H7 Cable Pull Switch 10A 1NO+1NC

SKU CH-8NAQ-B83MT

Emergency cable pull switch rated 10 A thermal with 1NO+1NC contacts, 50 ft maximum cable span and NEMA 1, 12, 4 enclosure

  • Emergency stop up to 50 ft cable span
  • 10 A thermal rating handles heavy loads
  • Maintained switch stays tripped until reset
  • Zamak housing rated NEMA 1, 12, 4
  • Left or right cable entry fits layout

Emergency Cable Pull Switch

The Telemecanique Sensors XY2CH13150H7 is a maintained emergency stop device rated for 10 A thermal current. It provides one normally open and one normally closed contact for safety circuits. The switch suits machinery where a single cable spans up to 50 ft.

Zamak Housing with NPT Entry

A Zamak case carries NEMA 1, 12 and 4 ratings for indoor and sheltered outdoor use. Wiring enters through a 1/2 in NPT port on the left or right side. Push-button reset and a 4.5 lb operating force allow deliberate actuation without nuisance trips.

Replaces Worn or Unrated Pull Switches

The unit upgrades older switches that lack NEMA 4 protection or the 3 A at 240 V AC and 0.27 A at 250 V DC ratings. It is not suited for applications needing dual-cable operation or an integrated indicator light.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $304.99
Pricier than about 92% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameTELEMECANIQUE SENSORS

Questions about this item

What AC voltage and current does the 1NO+1NC contact block actually switch?

The contacts are rated for 3 A at 240 V AC and 0.27 A at 250 V DC, with a thermal rating of 10 A.

What mounting space and cable entry does the Zamak housing require?

The body measures 7.76 in long, 2.68 in wide and 1.57 in deep, with a 1/2 in NPT wiring entry on the left or right side.

How is the switch reset after an emergency pull, and what is the common mistake?

After the cable is tensioned, press the blue push-button reset; the error is forgetting to re-tension the cable before resetting.

More in Contactors, Relays & Motor Starters

Similar items