We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Teradek Bolt Pro 2000 wireless video transmitter with BNC and HDMI ports

Teradek

Teradek Bolt Pro 2000 3G-SDI HDMI Wireless Video Transmitter 10-0991

SKU CH-01WW-96MGN

Wireless transmitter sends uncompressed 1080p60 4:2:2 video up to 2000 ft with <0.001 sec delay and USB 3.0 GRAB output

  • Zero-delay transmission under 0.001 sec latency
  • Uncompressed 1080p60 4:2:2 video up to 2000 ft range
  • Dual 3G-SDI and HDMI inputs with loop-out output
  • USB 3.0 GRAB engine for direct computer ingest
  • Multicast to four receivers with OLED pairing

Zero-Delay Wireless Video Transmitter

The Teradek Bolt Pro 2000 sends uncompressed 1080p60 4:2:2 video up to 2000ft over the unlicensed 5 GHz band. It accepts 3G-SDI and HDMI inputs for cameras, switchers or DIT carts. The system supports multicast to four receivers and includes a USB 3.0 GRAB engine for direct computer ingest.

Build and Connections

A single 75 Ohm BNC input and a Type A HDMI receptacle feed the transmitter, while a BNC loop-out passes the signal downstream. The receiver adds a USB 3.0 port that delivers the video stream with no added delay. An OLED screen on the unit enables quick pairing and manual frequency selection in the field.

Check Before Ordering

Verify that your source can output one of the listed resolutions and frame rates such as 1080p60, 1080i60 or 720p60. Confirm your workflow can use 48 kHz 24-bit PCM audio over the wireless link. Ensure the 5 GHz spectrum from 5.19 to 5.795 GHz is usable at your location.

How it compares

Measured against everything we stock in Video Capture Cards & Boxes, at today’s prices. Recalculated every night.

Price $2,837.99
Pricier than about 98% of the 987 comparable items (median $43.99).

Specifications

No published specifications for this item yet.

Questions about this item

What video formats does the 3G-SDI and HDMI input support?

The transmitter accepts 1080p at 60, 59.94, 50, 30, 29.97, 25, 24 and 23.98 fps, 1080psf at 30, 29.97, 25, 24 and 23.98 fps, 1080i at 60, 59.94 and 50 fps, 720p at 60, 59.94 and 50 fps, 480p at 59.94 fps, 576p at 50 fps, 480i NTSC and 576i PAL.

What physical connectors are on the transmitter?

One 75 Ohm BNC input, one Type A HDMI input and one 75 Ohm BNC loop-out output.

How do I enable the USB 3.0 GRAB engine on the receiver?

Connect the receiver's USB 3.0 port to a computer or DIT cart; the GRAB engine then ingests the uncompressed video feed directly with no added delay.

More in Video Capture Cards & Boxes

Similar items